Used machine tools in Groningen, Netherlands

Bezel moving from – diameter 110 mm 11497

steady rest travelling, travelling steady rest, steady rest, lynette -drawing at the photos

Lunette moving from TOS - diameter 120 mm 11486

• Manufacturer: TOS

steady rest travelling, travelling steady rest, steady rest, lynette -drawing at the photos

Four-jaw chuck – diameter 153 mm 19706

• Manufacturer: Theodor Eberlei

four-jaw chuck, 4-jaw chuck Feed size: Ø 153 mm | Passage: Ø 40 mm | Mass: 7 | Internal storage: 3A10301

Four-jaw chuck from – diameter 160 mm 20189

four-jaw chuck, 4-jaw chuck Feed size: Ø 160 mm | 1 set: Outside baking | Passage: Ø 42 mm | Mass: 11,2 | Internal storage: 3A10504

Three-jaw chuck from – diameter 310 mm 21678

three-jaw chuck, 3-jaw chuck Feed size: Ø 310 mm | Passage: Ø 110 mm | Bayonet: Short taper flange taper size 6, taper Ø 106 mm, bolt circle Ø 133.4 mm | Mass: 47,2 | Internal storage: 3A20902

Three-jaw chuck from – diameter 200 mm 21356

three-jaw chuck, 3-jaw chuck Feed size: Ø 200 mm | Recording process: Ø 168 mm | Passage: Ø 55 mm | Mass: 12 | Internal storage: 3A20502

Four-jaw chuck – diameter 190 mm 20638

four-jaw chuck, 4-jaw chuck Feed size: Ø 190 mm | Passage: Ø 57 mm | Mass: 10 | Internal storage: 3A10401

Three-jaw chuck from – diameter 200 mm 20571

• Manufacturer: Theodor Eberlei

three-jaw chuck, 3-jaw chuck Feed size: Ø 200 mm | Passage: Ø 54 mm | With: Base plate | Mass: 26 | Internal storage: 3A10401

Turn-Pull Spanner by Hilma-Römheld - 2646-8002 18350

• Manufacturer: Hilma

electronic clamping elements, rotary tensioner Tension: 160 kN | Stat. max.: Force 30 kN | Clamping stroke: 15 mm | Total stroke: 60 mm | Dimensions: 720/200 / H220 mm | Mass: 60 | Internal storage: 3C20601

Bezel by WMW - diameter 260 mm 18968

• Manufacturer: WMW

steady rest, steady rest, lynette -delivery in as-is condition as viewed

Bezel by WMW - diameter 212 mm 18969

• Manufacturer: WMW

steady rest, steady rest, lynette Max. passage: Ø 212 mm | Tip height: 319 mm | Edition: Grey cast iron | Technical drawing: by the photos | Dimensions: 610/120 / H650 mm | Mass: 59 | Internal storage: 3A20303

Clamping jaws from – 202/18/H75 mm 24561

• Manufacturer: Theodor Eberlei

Roller jaws, Floating center jaws, Pull down jaws, Machine vise jaws

Pull-down jaws from – 200/30/H100 mm 24545

• Manufacturer: Theodor Eberlei

Roller jaws, Floating center jaws, Pull down jaws, Machine vice jaws, Clamping jaws

Clamping jaws from – 160/14/H50 mm 24555

• Manufacturer: Theodor Eberlei

Roller jaws, Floating centre jaws, Pull-down jaws, Machine vice jaws -hole spacing: 100 mm/groove: 3 mm

Clamping jaws height adjustable from – 120 x 30 mm Hmax. 225 mm 34264

Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, clamping jaws pull-down clamp, pull-down jaw, side clamp