Used agitators in Groningen, Netherlands

Agitator tank 6.5 cbm, half pipe coil

• Manufacturer: Sielmann

Design: Cylinder suspended on 4 supports with dished ends. Inclined blade agitator mounted from the top center - without motor or gearbox - with baffle. External half-pipe coils around the cylinder and lower end....

Agitator tank 12.8 cbm, insulated

• Manufacturer: Sielmann

Design: cylinder, standing on 4 feet, height-adjustable, with conical bottoms, propeller agitator installed diagonally in the cylinder, 0.55 kW, 950 rpm, with internal PE heating coils for heating with 3 bar hot ...

Agitator tank 4.5 cbm, insulated

• Manufacturer: Sielmann

Operating data: Operating pressure 0.5 bar (as per drawing) Design: Cylinder, standing on 4 feet, with dished ends, flanged upper end, designed for a specific weight of 1.1 kg, eccentric agitator from above, 2 pr...

Agitator tank 0.9 cbm, insulated, double jacket

• Manufacturer: Sielmann

Content: 0.9 cubic meters | Material: stainless steel | Material specification: 1.4401/1.4404 | I. diameter: 1100 mm | Diameter: 1274 mm | Cyl. height: 750 mm | Height agitator: 900 mm | Upper floor: 233 mm | Lo...

Agitator tank 6.6 cbm, double jacket

• Manufacturer: Sielmann

Operating data: Designed for -0.5/+5 bar operating pressure Design: Cylinder, standing on 4 feet with dished ends. Inclined blade agitator from the top centered - without motor. Double jacket around the cylinder ...

Agitator tank 12.5 cbm, with heating coil

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 pipe feet with basket-shaped bases. Inclined blade agitator from the top centered, 3.0 kW, 88 rpm. External half-pipe coil around the cylinder, 10 turns, designed for an operati...

Agitator tank 1.1 cbm, vertical, half-pipe coil, insulated

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, with curved bottoms. Propeller agitator driven from above, eccentric, 1.1 kW, 156 rpm. With external half-pipe coils on the cylinder and lower bottom, operating pressure 3...

1200 liter agitator tank, Aisi 316 with propeller agitator

remarks: 3-legged frame made of Fe (lacquered); support ring of the cover made of Fe; 1 circular opening in the lid (see photos)

2000 Liter agitator tank, Aisi 304 with propeller agitator

• Manufacturer: SCHNEIDER AG

Volume: 2.000 liter | Upper bottom: agitator traverse with hinged cover | Stand type: bracket | Diameter inside: 1.230 mm | Cylindrical height: 1.650 mm | Total height: 3.100 mm | Technical equipment: outlet tap...

820 liter agitator tank, Aisi 304 with propeller agitator

Volume: 820 liter | Stand type: legs | Quantity legs: 3 Piece | Diameter inside: 890 mm | Cylindrical height: 1.200 mm | Total height: 1.800 mm | Manhole: in the upper bottom | Outlet: 32 mm | Notice: some resid...

20000 liter agitator tank, Aisi 304 with blades agitator

• Manufacturer: ALFA-LAVAL

remarks: Smaller dents in the upper bottom; in addition, former connections were welded or sheet metal welded into the upper bottom; former outlet fitting is no longer available; Suspension of the manhole cover i...

5870 liter isolated agitator tank, Aisi 304 with blade agitator

Volume: 5.870 liter | Stand type: legs height adjustable | Quantity legs: 6 Piece | Insulation: available | Insulating jacket: welded | Insulation material: PU - foam | Total height: 2.000 mm | Total width: 2.02...

600 liter agitator tank with propeller agitator, Aisi 304

Volume: 600 liter | Lower bottom: torispherical bottom | Upper bottom: open | Stand type: legs | Quantity legs: 4 Piece | Diameter outside: 900 mm | Cylindrical height: 920 mm | Total height: 1.800 mm | Outlet: ...

2900 liter insulated agitator tank, Aisi 304 with anchor agitator

Volume: 2.900 liter | Stand type: legs height adjustable | Quantity legs: 3 Piece | Insulation: available | Insulating jacket: hermetically welded | Insulation material: stone wool | Diameter inside: 1.800 mm | ...

4000 liter agitator tank, Aisi 304 with anchor agitator

• Manufacturer: ALFA-LAVAL

remarks: Upper bottom with 2 folding segments; 1 screwed-on reduction (DN 25 DIN 11851) on the outlet agitator features: We suspect that the output is 7/14 rpm (unfortunately the gear plate is pretty scratched)