Used agitators in Groningen, Netherlands

15000 liter insulated agitator tank, Aisi 304 with propeller agitator

remarks: Rechtecköffnung ca. 1000 x 1000 mm im Oberboden; leichter Korrsosionsansatz innen und außen

900 liter heat-/coolable agitator tank, Aisi 304 with propeller agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket material temperatur control system: AISI 304 (V2A) 1.4301

6500 liter agitator tank, Aisi 304 with 2 propeller agitators

max. allowable working temperature: 90 °C remarks: Cone height approx. 1300 mm; Manhole approx. 415 x 500 mm; 1 rectangular opening approx. 350 x 440 mm without cover in the upper bottom; in 1 tank 1 small crack ...

261 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: Heinrich Nowak

remarks: Diameter of hand hole approx. 150 mm; 2 of the feet are shorter than the other two feet (see photos; take this into account when setting up the vessel) EX-proof: motor is ex-proof (compliance with the ne...

6570 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

• Manufacturer: TUCHENHAGEN

max. allowable working temperature: 95 °C max. allowable working overpressure (dj): 3.0 bar max. allowable working temperature (dj): 95 °C Temperature control cylinder (dj): half-coil temperature control bottom (...

1500 liter agitator tank with propeller agitator, Aisi 304

agitator features: Agitator arranged eccentrically on a welded crossbar

1300 liter pharmacy agitator tank, Aisi 316 with dissolver agitator

• Manufacturer: H&K Behälter- und Edelstahltechnik

agitator features: There is also 1 propeller on the agitator shaft (see photos)

160 Liter isolated agitator tank with propeller agitator, Aisi 304

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

2500 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: GIG GRILL & GROSSMANN

remarks: Manhole diameter approx. 460 mm; outlet probably DN 50 reduced to approx. 15 mm by flanged fitting; 2 dip pipes inside the tank

1700 liter insulated agitator tank, Aisi 304 with blades agitator

remarks: Connections to the heating coils around the cylinder and the lower bottom were partially welded shut by the previous operator; we suspect that the heating coils are no longer functional

2000 liter agitator tank, Aisi 304 with lateral inclined blade agitator

remarks: Base plates of the feet made of Fe (1 base plate with hole; see photos) EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

180 Liter heat-/coolable agitator tank, Aisi 304 with propeller agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket material temperatur control system: AISI 304 (V2A) 1.4301

5000 liter insulated agitator tank, Aisi 316 with 3 agitators

remarks: 1 dent in the inner tank (overpressure of the no longer functional heating jacket; see photos); insulation jacket with smaller dents and partially detached plates; tank with adhesions inside; Devices for...

1270 liters heat-/coolable agitator tank, Aisi 304 with blades agitator

• Manufacturer: TUCHENHAGEN

max. allowable working temperature: 95 °C max. allowable working overpressure (dj): 3.0 bar max. allowable working temperature (dj): 95 °C Temperature control cylinder (dj): double jacket remarks: Possibly also d...

10000 liter heat-/coolable agitator tank / cream tank, Aisi 304 with anchor agitator

• Manufacturer: ABAB Allgemeine Behälter- u. Apparate Bau

max. allowable working overpressure (dj): 4.0 bar Temperature control cylinder (dj): half-coil temperature control bottom (dj): thermoplate remarks: 1 tank with 1 dent in the insulation jacket in the area of the ...