Used Foundry & Casting in Wallonia, Belgium

1992 Gravity die casting machine IMR C55

• used

• Manufacturer: IMR

Dimensions: Length: 2600mm; Width: 2700mm; Height: 2000mm 5KW; 380V; 50Hz With 2 divided dip tanks With light barriers With SIEMENS S5 control unit

2006 Motorized casting ladle, 9 t, IBW

• used

With manual gear motor, frequency controlled With control box and remote control With mechanical switch to "tilting by hand" With planet gearbox (possible to use for treatment ladle) With counter weight on the ov...

Casting ladle 2 t, SENSENBRENNER, with teapot spout

• used

• Manufacturer: Senssenbrenner

With planet gearbox Ladle and refractory in good condition

Gravity die casting machine, Hydraulic 600×400mm

• used

Dimensions: Length: 2500mm; Width: 750mm; Height: 1500mm 3 guides Without hydraulic unit

Casting ladle, 2,8 - 3 t, brand KETTIN THIRIART

• used

Outside: 1850 mm, h. 2000 mm Inside: Ø 1000 mm, h. 1020 mm Weight: 600 kg

2 lifting bails for small casting ladles, ± 60 kg

• used

• Manufacturer: Kleine

Ø hole for ladles 350 mm, ladles ± 60 kg Ø ± 370/280 mm, height 390 mm Tiltable by hand Without chain hoist With 1 control for hoist

Gravity die casting machine BÖCKLE /SPRÖTZE, for aluminium, tiltable

• used

Tiltable 90° With hydraulic unit, control box, electronic time régulation

Gravity casting machine, useful dimensions 650 x 650mm

• used

Dimensions: Length: 3100mm; Width: 900mm; Height: 1400mm Horizontal swivelling

Gravity die casting machine, hydraulic 700×510mm

• used

Dimensions: length: 1950mm; width: 700mm; height: 1800mm With 4 guides

Horizontal tiltable gravity die casting machine, hydraulic

• used

Dimensions: Length: 2100mm; Width: 800mm ; Height: 1150mm Min opening: ±270mm; max opening: ±460mm With 2 guide rods Turnable With hydraulic power With hydraulic control by 2 levers 380V, 4kW

Casting ladle with planetary gear and feet for lifttrack, 2,5 t, teapot

• used

With feet for lifttrack and with lining With teapot spout 4 sides in metal sheet

Gravity casting machine, useful dimensions 450 mm x 600 mm

• used

Operated by a pneumatic cylinder, Ø 200 mm 2 guide rods, Ø 65 mm, 1750 mm x 600 mm, h. 720 mm Has been used with moulds 50 mm x 420 mm x 540/350 mm

Lower plates cast iron 600 mm X 575 mm, 41 kg

• used

Casting ladle, ± 3,5 t aluminium, Ø 1640 mm, h. 1450 mm

• used

Overhauled Outside: Ø 1640 mm, h. 1450 mm | Weight: 3000 kg

900 mm X 700 mm X 300 mm, 230 kg, cast iron

• used