Used Foundry & Casting in Wallonia, Belgium

2006 Motorized casting ladle, 14t, IBW

• used

Door dimensions: depth: ø1750 mm, h. 1630 mm Motor: SEW, type: K47DT90L4BMG, 1,5 kW, 1410 rpm, 230/400 V Height of the hook ± 800 mm, with remote control With manual gear motor, frequency controlled With counterw...

Small casting ladles ROPER, 300 kg

• used

• Manufacturer: Kleine

With oilbath gearbox In good working condition Outside dimensions: length 1100 mm, h. 850 mm | Inside: Ø 450 mm, h. 500 mm

Casting device with 4 ladles, ± 180 kg

• used

Hand lip-poured ladles, content 150 - 200 kg (3 with cover and one without cover) With aerated suspension ring With hand wheel and locking

2007 Casting ladle ACETARC, 7 t

• used

Type: ESSEX, serial number: 3123/67 With oilbath gearbox worm wheel and shaft number 4 With 2 spouts, without lining

Casting ladle ODERMATH 500 kg

• used

• Manufacturer: ODERMATH

External dimensions: Length: 1300 mm; Width: 650 mm; Height: 1300 mm Internal dimensions: ø 630 mm; Depth: 650 mm Interchangeable pan with wedge and quick-locking mechanism

Casting ladle, ± 2,3 t, COLLIN

• used

With with oilbath gearbox With ring of lifting Outside dimensions: 1900mm x 1100mm, h. 2100mm | Useful dimensions: Ø 1000mm, H (without concrete) 1050mm

Casting ladle SOPAME, ± 1 t

• used

With oilbath gearbox With lining Weight: ± 350 kg | External dimensions: 1400 mm x 750 mm, h. 1300 mm | Useful dimensions: Ø 660 mm, h. 770 mm

2012 Gravity die casting machine IMR C40H

• used

• Manufacturer: IMR

Dimensions: Length: 2170mm; Width: 1916mm; Height: 1660mm 6KW; 380V; 50Hz With 2 divided dip tanks With light barriers With SIEMENS control Pressure 45-55bar

Casting ladle UTARD, 2 t, with teapot spout

• used

With gearbox In good condition Inside: 900 mm x 900 mm | Weight: 800 kg

Rest cast iron molds ±1000kg iron

• used

Outer dimensions: Ø: 1000mm; Height: 470mm Internal dimensions: Ø 760 (top), Ø600mm (bottom), height: 350mm thick-walled

Casting ladle UTARD, 5- 6 t

• used

With oilbath gearbox With 2 pouring spouts With heat protection shield, With steering wheel and air vented band

Gravity casting machine for bronze and brass EOLE

• used

• Manufacturer: EOLE

Clamping plates 200x300 mm With old relay control With immersion basin movable on 3 axes With a tilting and rotating shelf

2002 Gravity die casting machine IMR C60X

• used

• Manufacturer: IMR

Dimensions: Length: 3150mm; Width: 2500mm; Height: 1960mm 6KW; 400V; 50Hz Max opening of clamping plates: 700mm, side stroke: 335mm Hydraulic tank: 200l, max pressure: 60bar With 2 split dip tanks With light barr...

Casting ladle SENSENBRENNER, 2,2 t, without oilbath

• used

• Manufacturer: Senssenbrenner

With gearmotor and oil bath To be modified with Rotostop In good condition

Base plate, cast iron, 130 - 150 kg

• used