Used Drilling Rigs

2000 REEDRILL 400C

• Manufacturer: Reedrill

3.5” – 4.5” Inch Class CAT Diesel Engine Cab & Rod Changer – Hydraulic Drill 4600 total hours New Hydraulic Rotation Pump

2011 FURUKAWA DCR20

• Manufacturer: Furukawa
• Model: DCR20
• Horsepower: 439.8552451407689 horsepower
• Machine weight: 20,100 kilogram

3.5 – 6.5 Inch Class CAT C-13 Tier III Engine 3 Drill Pipe Estimated 6000 Total Hours with less than 500 hours on out of Frame Rebuild by CAT with warranty Angle Indicator

2005 CATERPILLAR MD5090

• Manufacturer: Caterpillar
• Model: MD5090

3.5 – 4.5 Inch Class HPR1H-ATW Hammer CAT C9 Diesel Engine Low Hours Set up for T45 and long feed for 20′ drill steel Excellent Condition

INGERSOLL-RAND ECM350

• Manufacturer: Ingersoll Rand
• Model: ECM-350
• Drilling depth: 4.356 meter
• Mast Height: 5.753 meter

2.5 – 3.5 Inch Class VL140 Drifter Comes with 3 Air Compressors This is a Complete Drill Package with 3 Ingersoll-Rand Portable Air Compressors

2006 SOOSAN SD1000E

• Manufacturer: Soosan

3.5 – 4.5 Inch Class SP-3 Drifter Cummins 5.9L Diesel – Installed New w/ Only 438 Hours Enclosed Cab w/ AC Extendable Boom Rod Changer Unit Running T45 Drill Steel

2007 ATLAS COPCO ECM720

• Manufacturer: Atlas-Copco
• Model: ECM 720
• Horsepower: 384.8733394981728 horsepower
• Drilling depth: 29.5 meter

Montabert HC200A Drifter – ‘0’ hours on fresh service CAT Engine Set up for 60mm drill steel Onboard Air of 480 CFM @ 150 PSI 5500 total frame hours 2012 percussion hours w/ ‘0’ hours on new service. PRICED TO SE...

1973 PORTADRILL 10TL TOP HEAD DRIVE DRILL RIG #2916Tb

• Manufacturer: Portadrill

Manufactured 1973, top drive updated to a Foremost 5000 ft/lb torque head, standard 36’ mast can pull 30’ rods, but only makes connections with 20’ pipe, 3” plumbing, 2-1/2” swivel hose, 3 x 4 Mission mud pump, n...

1998 GARDNER-DENVER 300

• Manufacturer: Gardner Denver

3.5” – 4.5” Inch Class CAT 3126 Diesel Engine Self-Contained Hydraulic Drill HPR1H Hydraulic Drifter New Injection Pump 2017 Handles a 20’ft starter steel Set up for T45 Low frame Hours Extendable Boom Dust Colle...

2013 ATLAS COPCO FLEXIROC T45

• Manufacturer: Atlas-Copco
• Model: FLEXIROC T45
• Horsepower: 225 horsepower

3.5 – 4.5 Inch Class CAT C9.3, TIER 4 ENGINE COP2560 Drifter Toe-Hill Drilling System Dust Collection System Double Hose Drum Carousel Type Rod Handling System Water Mist System 5101 Engine hours 1953 Percussion ...

GEOPROBE 6610DT DIRECT PUSH AND AUGER DRILL RIG #2335T

Manufactured 2001, original owner, GH60 hammer, GA2000 auger head attachments, aux hydraulic connection, rear stabilization, outriggers, rod rack, rear receiver hitch, currently working Price: $53,500 GEOPROBE 6600

2003 SANDVIK D55SP

• Manufacturer: Sandvik

DTH Class 3508 Cat Engine Single Pass Unit Currently using a 8” DTH Hammer with a 9” Bit Equipped w/ ( 2 ) 6 ½” x 25 ft. Drill Pipe w/ 8” DTH Hammer Dust Collector Mast 73’ Long, U/C 85% – Excellent condition. Un...

2014 ATLAS COPCO FLEXIROC T45-10

• Manufacturer: Atlas-Copco
• Model: FLEXIROC T45
• Horsepower: 225 horsepower

2014 Year – Atlas Copco FlexiRoc T45-10 Powered by a Caterpillar C9.3 Diesel Engine472 CFM @ 174 PSI onboard Air Compressor COP3060 Drifter 13,219 Total Hours 4,922 Percussion Hours Set up for T51 (51mm) Drill St...

MAYHEW 1000 DRILL RIG #4401Ta

Gardner Denver mud pump, stationary table, 2-7/8" kelly, mounted on 1977International truck, approx. 300’ 2-7/8" drill pipe, 7-7/8" & 9-1/4" bits, running condition Price: $62,500

FAILING 1500 DRILL RIG #2387T

• Manufacturer: Failing
• Model: 1500
• Gearbox type: Manual
• Mast Height: 0.9398 meter

Rig and truck reworked in 2022, HD drawworks, dual band brakes, 3rd line, 5 x 6 Gardner Denver mud pump, 8” rotary table, 2-7/8” kelly, chuck pulldown, mechanical clutches, mounted on 1999 International tandem ax...

2005 Sandvik Pantera 1500

• Manufacturer: Sandvik

21,163 frame hours 11,015 percussion hoursSet up for T51 Well maintained for age

Ingersoll Rand CM-672 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: CM-672

Good condition Ingersoll Rand CM-672 Drilling Rigs manufactured in 1999. Located in USA and other countries. Click request price for more information.