Used Drilling Rigs

2024 SOOSAN JD1400E-II

• Manufacturer: Soosan

2023 Year – JD1400EII Rock CommanderHandles a 14’ft lead rod and changes 12’ft thereafter. Carries 86’ft of drill steel onboard. New Features: Operator Comfort – Enlarged operators cabin with movable drill contro...

SCHRAMM T660 DRILL RIG #2583T

• Manufacturer: Schramm

Manufactured 2001, 1000/350 Sullair compressor, Cummins N14 (525 hp) deck engine, mounted on 2000 International truck with DT530 engine, 9 rod carousel, rod box, pipe rack, 3 hydraulic leveling jacks, new tires, ...

CME 750 DRILL RIG #3451Tb

Auto hammer, 3 winches, 6 cylinder Deutz diesel Tier 1 engine, runs and drives great, no leaks, 50' hollow stem auger Price: $52,500

INGERSOLL-RAND ECM350

• Manufacturer: Ingersoll Rand
• Model: ECM-350
• Drilling depth: 4.356 meter
• Mast Height: 5.753 meter

2.5 – 3.5 Inch Class VL140 Drifter Comes with 3 Air Compressors This is a Complete Drill Package with 3 Ingersoll-Rand Portable Air Compressors

2005 Sandvik Pantera 1500

• Manufacturer: Sandvik

21,163 frame hours 11,015 percussion hoursSet up for T51 Well maintained for age

2024 SOOSAN JD800E-II

• Manufacturer: Soosan

New 2024 Soosan JD800E-II Rock Commander w/ QSB6.7 Series Tier 4 Final Equipped with JET9II Drifter 235 CFM @ 150 PSI Air Package Can be setup for T38, T45, or T51 – Customer Choice Unit starts a 14’ft starter st...

2019 Furukawa HCR1450EDII Stock# 4501

• Manufacturer: Furukawa
• Model: HCR1450EDII
• Horsepower: 260.15828523569866 horsepower
• Machine weight: 16,460 kilogram

Unit has 4,235 total hours Unit will be fully cleaned and freshly serviced. Excellent condition.

2006 Atlas Copco ROC D3

• Manufacturer: Atlas-Copco
• Model: ROC D3

Equipped with COP 1240 Drifter 28 hours on machine since upgrades: New track chains New Ecm motor control New mast roller New cable New nose cone seals New accumulator diaphragms 2 new control switches at control...

1997 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Equipped with YH80A Drifter – Ready to work – Repairs needed are one door with broken hinges – Fuel stop solenoid – This machine has a new air end and has less than 200 hours on hydraulic pump

2005 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Equipped with YH80A – Ready to work – Repairs needed are inoperable fuel stop solenoid

2006 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Equipped with YH80A Drifter – Repairs needed or in the process of being repaired – Dust collector top new part has been fabricated need’s installed – Rod changer arm is broken have new parts to replace purchase...

2004 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Equipped with YH80A Drifter – Mechanic believes there is a broken pin in the fuel injection pump machine will idle but will not idle up. – Other repairs needed are inoperable fuel stop solenoid

2004 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Comes with YH70 not currently installed but will be mounted for transport – This unit has tracking issues will move but unknown if it’s the final drives or hydraulic motors. – Hammer needs to be mounted back on...

2000 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Equipped with YH80A Drifter – Unit needs nothing is currently running on a job at this time. – Has newer paint job – Manual rod changer – Long boom

Furukawa HD712 Hydraulic Drifter

• Manufacturer: Furukawa

HD712 Hydraulic Drifter / Hammer – Surplus / New For use on the following Furukawa machines: HCR1200ED HCR1200EDII

Ingersoll Rand DM-45 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: DM-45

Good condition Ingersoll Rand DM-45 Drilling Rigs available between 1993 and 1998 years. Located in USA and other countries. Click request price for more information.