Used Agitators, Blenders, Mixers in Hiroshima, Japan

Ribbon Blender

Main motor 11Kw, discharge motor 0.75Kw (reduction ratio 1/29) Capacity approx. 1500L

Ribbon Blender

Total capacity: 735L Impeller rotation: 3-30 rpm (reduction ratio: 1/240) Steam operating pressure: 1.5 kg/cm2

Ribbon Blender

Tank dimensions: L1500, W900, H560. *The tank is a loose V-shape and the capacity is unknown. External dimensions: L2600, W900, H1250. Is the outlet for liquid use (there is a stand for the pump)?

SUS tank with agitator

250L φ710×H640(Body)×H750(Leg) Remarks: Ancillary product for 6931 Pressure Cake Mixer

［Satake] Agitator Model No

• Manufacturer: Satake

Shaft and blade material: SUS. Three propellers x 1. Rotation speed: 360 rpm. Base with casters/manual elevation type.

Ribbon Blender 4000L

Total capacity: 4000L Discharge: Bottom slide damper With SS jacket Main unit only, without board

[Kajiwara] Paddle Mixer

• Manufacturer: Kanajiwara

Purchasing area: 60Hz | Material: Wetted part SUS304 | Quantity saved: １

V Type Mixer

Where to use: Chemical factory Food factory Feed and fertilizer factory | Whole picture: 150L, approx. 80L SUS

［Mitsui Miike (now Nippon Coke)] Cooler mixer No model

• Manufacturer: Mitsui Seiki

1000L Remarks. If serviced. It will be clean, please don't worry.

［Ikeda Rika] V type mixer No model

• Manufacturer: Ikeda

Capacity: about 10L With agitator Power: 0.2kw/100V | Purchasing area: 60Hz | Material: Wetted part SUS | Quantity saved: One

［Special Kikka] Homo-Mixer Model No

• Manufacturer: Daiichi Bussan Co.

500 to 2000rpm Power: 200ｗ/100V | Material: Wetted part SUS | Quantity saved: One

Meiwa Industry OM-130

• Manufacturer: Meiwa Industry

Total capacity 130L. Cage rotation speed 11/13rpm(50Hz/60Hz). 1.5Kw200V. Vessel rotation speed 22/26rpm (50Hz/60Hz). 0.4Kw 200V. The mixing layer rotates both vertically and horizontally to increase mixing power.

2007 Buhler SDV 1100

• Manufacturer: Bühler

Chilled roll Effective dimensions of roll: φ400×1100 Motor: 45kw Weight: 4.2 tons With board We were able to check the operation of each part individually, but the operation check using the board shows only roll ...

2008 Inoue BDM-50

• Manufacturer: Inoue Manufactory

Agitator: High-speed turbine 2.2kw/variable speed Low-speed butterfly 1.5kw/ variable speed Hydraulic unit: 1.5kw Oil rotary vacuum pump: 0.75kw 2 tanks, 1 control panel

Aikosha Manufacturing AM-90

• Manufacturer: Aikosha Manufacturing Co.

With ON/OFF switch & timer. Spare blades available.