Used Agitators, Blenders, Mixers in Hiroshima, Japan

Kawata SFC-50

• Manufacturer: riverbank

High-precision mixing by three-dimensional motion (vibration + agitation) Remarks Blades: missing.

2005 Buhler SHP · TS · 40

• Manufacturer: Bühler

Wetted parts material: SUS Hydraulic drive motor Agitator: High-speed turbine, low-speed 3 open propellers Explosion-proof hydraulic unit

2008 Inoue BDM-50

• Manufacturer: Inoue Manufactory

Agitator: High-speed turbine 2.2kw/variable speed Low-speed butterfly 1.5kw/ variable speed Hydraulic unit: 1.5kw Oil rotary vacuum pump: 0.75kw 2 tanks, 1 control panel

Sugiyama Heavy Industries UA-160S

• Manufacturer: Sugiyama Heavy Industries

High-speed mixer Mixing capacity: MAX 1250L, buffed on the inside Motor: Tilting vane 90kw/220V Chopper 30kw/220v Jacket Remarks No control panel, main unit only

SUS tank

Total capacity: approx. 2000L. *Since no data is available, actual size measurement is required for some accurate capacity. With agitator (eG3), reduction ratio 1/5.

SUS tank

Total capacity: approx. 1000L. *Since no data is available, actual size measurement is required for some accurate capacity. With agitator (eG3), reduction ratio 1/5.

Aikosha ACM

• Manufacturer: Aikusho

Agitator: spiral hook with control panel Material: Wetted part SUS | Quantity saved: One

Araki Iron Works SRG-490

• Manufacturer: Araki Ironworks

Motor: Dispersion 22Kw 4P200V (Explosion-proof) Agitation 7.5Kw Hydraulic 1.5Kw With hand control panel Remarks With inverter (2 pcs.)

Kawata SMC-20

• Manufacturer: riverbank

Model SMC-20 Total capacity: 20L, Loading capacity: 12-14L

Yamato Seiki 300 liters

• Manufacturer: Yamato

Motor: 11kw Vessel capacity: 300L (Vessel fixed type) Wetted part material: SUS with jacket Vacuum specification Remarks No control panel and vacuum pump. *Exhaust 2500L Large trestle is attached, but it can be r...

1990 Hosokawa Micron DBX-2000R

• Manufacturer: Hosokawa

Capacity: 2000L Power: 5.5kw / 0.75kw | Material: Gluing section SUS | Quantity saved: One

Deoksha V1

• Manufacturer: Deoksary

Charge amount: 60L With intensive bar Can body material: SUS304

Inoue Manufacturing Cooling

• Manufacturer: Inoue Manufactory

Roll diameter: approx. 350φ (137 吋)* actual size measurement Although it is old, it was serviced and used by the manufacturer three times.

2001 SMTHE HFM-5 · HFM-10

• Manufacturer: SMT

HFM-5 Motor: 1.5kw Throughput: 3-5L/batch Rotation speed: 8000rpm(MAX) HFM-10 Motor: 2.2kw Processing volume: 5-10L/batch Rotation speed: 15000rpm(MAX) φ80 6 blades, sealed jacketed vessel

1999 Araki Iron Works RG - 100

• Manufacturer: Araki Ironworks

Main unit: Explosion-proof specification Starting board: Non-explosion-proof area Remarks Drawings only available