Used in Hiroshima, Japan

SUS tank with coil
Capacity: approx. 10 m3 With agitator (missing due to diversion of drive unit) Only near the bottom of the coil With heat insulator (with dents, etc.)
Hiroshima, Japan
Elepon Chemical Machinery TVC-020-35
- Manufacturer: Elepon Chemical Machine
200V 60Hz 1.5kw 50rpm Power: 1.5kw | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
Asada Ironworks MHK-20
- Manufacturer: Asada Ironworks
Due to long-term storage after maintenance, immediate delivery is not possible, but delivery can be made in a short period of time. Hydraulic unit available Drawings available
Hiroshima, Japan
Tokuju Kosakusho V-200
- Manufacturer: Tokuju Corporation
200L in stock / Total capacity 475L External dimensions: 2500 x 800 x 1950H (mm) Weight: approx. 700kg
Hiroshima, Japan
Tokyo Coki MT-CD-2
- Manufacturer: Tokyo Corki
Cooling and drying equipment in which cooling water or hot water is passed through a jacketed stainless steel trough, and cooled and dried as it is moved. The material rises from the lower vane to the upper disch...
Hiroshima, Japan
2012 [Kyoritsu] Upper discharge type *Maintained
- Manufacturer: Kyoritsu Seisakusho
18" top discharge type.　　1.800 rpm. Serviced and test run verified. Click here to see a video of the trial run (YouTube) upon completion of maintenance.
Hiroshima, Japan
1992 Tomoe Kogyo AS16V
- Manufacturer: Tomoe kogyo
Two-phase separation Rotation speed: 15,000 rpm Starting board and disassembly tools are available. Two units of the same type are owned and there is a spare rotor for one unit. Click here to view a video of a tr...
Hiroshima, Japan
Tomoe Kogyo AS-26
- Manufacturer: Tomoe kogyo
Three-phase separation Rotation speed: 15,000 rpm With startup board Click here to see a video of the trial run when the maintenance was completed (YouTube).
Hiroshima, Japan
1985 Fukoku Industry HX-500
- Manufacturer: Fukoku Industry
Non-humidified type It was used for dehydrating the sweet potato pomace.
Hiroshima, Japan
2007 Mitsuwa Pump Works 3SM (S) -LB
- Manufacturer: Mitsuwa Pump Works
Caliber: 80 x 80 Pumping capacity: 0.88 m3 / min Total head: 8m Shaft sealing method: Double mechanical seal With materials
Hiroshima, Japan
2002 Osaka sanitary SE 76-150
- Manufacturer: Osaka sanitary
Mechanical seal Ability unknown (No information on the nameplate · No nameplate)
Hiroshima, Japan
Togoku Industry HX-450
- Manufacturer: Fukoku Industry
Main part SUS, screw 450φ × 4500L, 0.23rpm ~ 0.94rpm (reduction gear 1/1479) Previous history: Dewatering sludge
Hiroshima, Japan
Alfa Laval BRPX413XGD-14-60
- Manufacturer: Alfa-Laval
- Model: BRPX
concentrator Power: 30kw | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
Tanabe Wiltech Z2L-3LV
- Manufacturer: Tanabe Wiltech
5000rpm/4400G Nominal capacity: 3-5 m3/h New motor will be installed at the time of servicing
Hiroshima, Japan
2003 Okawara Kakoki L-8
- Manufacturer: Okawara Kako Kikai Kikai
Moisture evaporation capacity: 3kg/h Hot air inlet temperature: 250°C, exhaust air outlet temperature: 100°C Disk atomization, parallel flow method Atomizer model: OCA-008B Collection method: Single point collect...
Hiroshima, Japan