Building Filters
Hiroshima, Japan
SUS tank
Total capacity: approx. 3000L. *Some accurate capacity requires actual size measurement due to lack of data. Equipped with an agitator (eG3).
Hiroshima, Japan
SUS tank
Total capacity: approx. 2000L. *Since no data is available, actual size measurement is required for some accurate capacity. With agitator (eG3), reduction ratio 1/5.
Hiroshima, Japan
Asada ironworker MHK-30
- Manufacturer: Asada Ironworks
Tank: Total capacity 1500L (effective 1300L) High speed: Shear agitator + Low speed: Scorpion blade Rotation speed at high speed 300～1000rpm Rotation speed at low speed Rotation speed at low speed Remarks High-sp...
Hiroshima, Japan
1990 Hosokawa Micron DBX-1000RMW
- Manufacturer: Hosokawa Micron
Mixing capacity 1000L Motor: 3.7Kw for rotation (explosion-proof) / 0.4Kw for revolution (explosion-proof) Rotation speed: 55RPM for rotation/ 1.6RPM for revolution Design withstand pressure: FV Jacket: 1.9Kg/cm²...
Hiroshima, Japan
1996 HAKKO INDUSTRIES (now GL HAKKO) 6000L
- Manufacturer: Hakko
Explosion-proof, cyclo reducer (reduction ratio 1/15). Shaft seal: mechanical seal. Maximum pressure of main unit: FV to 0.18 MPa / Jacket: 0.54 MPa. Design temperature: [Body] -20 to 170°C / [Jacket] -20 to 200°C.
Hiroshima, Japan
ORION RKED2200A
- Manufacturer: Orion
Air-cooled Cooling capacity 7.9/8.7Kw Refrigerant R-407C Power 3.5Kw/4.6Kw
Hiroshima, Japan
SUS tank
Total capacity: approx. 1000L. *Since no data is available, actual size measurement is required for some accurate capacity. With agitator (eG3), reduction ratio 1/5.
Hiroshima, Japan
SUS tank
Total capacity: approx. 2000L. *Since no data is available, actual size measurement is required for some accurate capacity.
Hiroshima, Japan
SUS tank
Total capacity: approx. 500L. *Some accurate capacity requires actual size measurement due to lack of documentation. Without agitator.
Hiroshima, Japan
Mutual Sangyo RM-1000
- Manufacturer: mutual industry
Capacity: 660L Gear ratio: 1/30 Lower discharge (slide gate type) Click here to see a video of the test run (YouTube) upon completion of the maintenance.
Hiroshima, Japan
1996 Tomoe Kogyo AS16V
- Manufacturer: Tomoe kogyo
Two-phase separation Rotation speed: 15,000 rpm Starting board and disassembly tools are available. Two units of the same type are owned, and there is a spare rotor for one unit. Click here to see a video of the ...
Hiroshima, Japan
1989 Taisho Kikai Kogyo HNC-301C
- Manufacturer: Taisei Machine Industry
Casing, rotor: SUS made stator: rubber Honda stator motor interchangeable motor: 2.2 kW Discharge amount: 700 to 2000 L / h * Flow control equipment required separately.
Hiroshima, Japan
1988 Tanabe AUT - 42
- Manufacturer: Tanabe
42" SUS316 Fully automatic bottom discharge type, hydraulically driven. No control panel. Hydraulic drive has been converted to motor drive.
Hiroshima, Japan
Four stirrer paddles
Four paddle blades × 2 steps Motor: 11kw / 440v Power: 11kw | Material: Wetted part: SUS | Quantity saved: 1
Hiroshima, Japan