Used in New Jersey, USA

Ball Mill Approximately 30"x30" Chamber

used Ball Mill. Approximately 30"x 30" Chamber. Ceramic Lined. On stand with 2 HP, 3ph, 60 cyc, 1750 rpm motor.

Filter with Strainer and Valve

Filter with Strainer and Valve. Approx. 3/4" Bottom and side outlet. Approx. 1/2" valve outlet.

Catridge filter

Catridge filter. Has SS filter cartridges with fine mesh screen.

1 HP Mixer/Agitator with Stainless Steel Shaft

used 1 HP Mixer/Agitator with Stainless Steel Shaft. 230/460 volt, 1725 RPM. Bridge mount (4' L x 1' W) or remove and mount on flange. Stainless Steel Shaft is 3/4" diameter x 4'L with (2) prop type blades appr...

10 HP Tote/Drum Mixer with pneumatic stand to raise and lower

used 10 HP Tote/Drum Mixer with pneumatic stand to raise and lower. Motor is 10 HP, 230/460 volt, 1160 rpm. Stainless Steel Mixing shaft is 25.5" and 45" blade to the motor. From mixing blade to top of motor is ...

Clamp-On Air Mixer

Used Clamp-On Air Mixer. 54" overall length. 39" L x 3/4" dia. stainless steel shaft. no blades. Pneumatic mixer.

5 cuft Stainless Steel Double Cone Blender

used 5 cu.ft. Stainless Steel Double Cone Blender. 6" butterfly valve discharge. 16" Top opening (carbon steel cover). Driven by 1.5 HP, 1725 RPM, 230/460 V motor reduced to pulley and gearbox. Operating heigh...

1 CuFt Paddle Blender

• Manufacturer: *

Used approx. 1 Cu.Ft Marion Type Paddle Mixer, Stainless steel. Equipped with electric blanket heater jacket. 12" wide X 14" long X 16" deep. Safety grate on top. Hinged top cover. 1/2 Hp 3 phase 60 cycle 230/4...

Clamp-On Air Mixer

Used Clamp-On Air Mixer. 41" overall length. 29" L shaft with (2) 316 stainless steel prop type blades that are approx. 5" diameter. Pneumatic mixer.

Clamp-On Air Mixer

Used Clamp-On Air Mixer. 50" overall length. 35" L shaft with turbine type blade that is approx. 11" diameter. Pneumatic mixer.

clamp-on stainless steel mixer/variable speed agitator

Used clamp-on stainless steel mixer / variable speed agitator with digital readout. Driven by 1/2 HP, 1725 RPM, 115 Volt, single phase motor. Has a 30" lgth. shaft with collapsible agitator blades (approx. 8" i...

Mixer/ Agitator (Bolt-on type)

Mixer/ Agitator. (Bolt-on type) (2) Each. Motors are 1/2 HP, 1750 RPM, 230/460 volt. Motors go into gearbox (not sure output speed) Stainless Steel shaft approx. 29" with 14" Dia. mixing blades.

2" x 15" Sanitary Pump

used 2" x 1.5" Sanitary Pump. Driven by 5 HP, 230/460 volt, 3490 rpm motor. Last used in sanitary food plant.

Centrifugal pump Sanitary connection

Used Centrifugal pump. Sanitary connections. 3" x 2". Has an APPROX. 20HP, 230/460 v, 3 Ph, 60 cyc., 3525 RPM motor. Hard to read Motor nameplate. Confirm Motor information before purchase

Urea Spherodizer Granulation Plant

Urea Spherodizer Granulation Plant. Granulation Section Only. C&I Girdler Semi-carbon design. 1000 T/D design in (2) trains. 1500 T/D maximum recorded production. Major equipment includes:(2) Each Spherodizer Gr...