Used Filter Presses in New Jersey, USA

Seitz Enzinger Noll Stainless Steel Polishing Filter Press

• used

• Manufacturer: Seitz

Seitz Enzinger Noll Orion Stainless Steel Polishing Filter Press - Type OF 100/200. (75) 39" x 39" (100 cm) Plates. 0.5" Plate Thickness. Overall dimensions = 23' lgth. x 7' ht. x 5' wide. approx 8,000 lbs plus...

Filter Press, 958 Sq.Ft. Filtration Area, Polypropylene Plates, Manufactured by Pacific Press Co. - IPP# 238423

• used

• Manufacturer: Pacific Press Co

Side bar design with semi automatic plate shifter four eye discharge washing plates with ¼” recess Press can be upgraded to 100 cu ft cake capacity and 2079 sq. ft. filtration area with additional plates Single h...

Alsop For 12 Inch Round Plate Filter Press #12782

• used

• Manufacturer: Alsop For 12 Inch Round Plate

Alsop filter press skeleton for 12" round plates, w/eco pulsafeeder lobe type pump, no drive on portable base # 0010pf (xp start/stop box)

Filter Press, 88.16 Sq.Ft. filtration area, 316L Stainless Steel, Manufactured by Star Filter Press - IPP# 247070

• used

• Manufacturer: Star Filter Press

Polypropylene Schenk Filter Press - IPP# 231224

• used

• Manufacturer: Schenck

stainless steel recessed plate and polypropylene frame filter press (2) eye top and bottom feed/discharge stainless steel skeleton, hydraulic press mechanism with built on powerpack and manual controls

Polypropylene Perrin Filter Press - IPP# 228111

• used

• Manufacturer: Perrin

123 chambers. Plates are made from non-reinforced, molded, pressure-resistant polypropylene. Cake thickness is 32 mm. Filter frame is heavy duty construction from A-36 steel with Stainless steel covered side rail...

Polypropylene Netzsch Filter Press - IPP# 221712

• used

• Manufacturer: Netzsch

Kom #740.213 (25) membrane plates, (24) recessed plates, (2) end plates, 20 mm deep recess, (4) corner 50mm discharge, 100mm center feed, cake thickness: 35 mm, single screw press mechanism driven by a hydraulic ...

Filter Press, 140 Sq.Ft. filtration area, Stainless Steel plates, Hercules Press Filter - IPP# 88067

• used

• Manufacturer: Hercules

polishing filter press. 4 eye design. Manual handwheel closure.

Polypropylene Haecker Filter Press - IPP# 103091

• used

• Manufacturer: Haecker

recessed plate filter press. 2 end plates, 50 mm center feed, motorized hydraulic closure.

Ertel 12" Filter Press 2 Hsb4 #15024

• used

• Manufacturer: Ertel 12" Filter Press

12" diameter round 304 stainless steel filter press by ertel engineering, model 2 h sb4, serial # 62-304 ss. Features all stainless steel contact surfaces, 12" diameter round frames and screended plates, five tot...

Polypropylene Schule Filter Press - IPP# 207197

• used

• Manufacturer: Schule

(2) end plates recess 700mm x 700mm x 7mm deep, 70mm center feed, 50mm 4-corner discharge, hydraulic press mechanism

Sperry Filter Press Size C-7 #17295

• used

• Manufacturer: Sperry Filter Press

7" x 7" 316 stainless steel filter press by sperry filter press, size c 7, serial # x43253. Features 6-1" thick frames and 7-1. 250" thick plates with 3/8" top and bottom female npt ports, rated for 100 psi servi...

Polypropylene Filter Press Plates Only - IPP# 108390

• used

(16) chambers, 1.72 cubic meter cake capacity 2-eye top side feed, Red and blue buttons (washing plates).34.5

Polypropylene Schenk Membrane Filter Press - IPP# 204563

• used

• Manufacturer: Schenck

Membrane filter press, hydraulic driven by Siemens 500 V 50 Hz 4,2 A 1410 rpm EEx e II.

J-PRESS 800G32-16-8DYLW

• used

• Manufacturer: J-PRESS

Used J-Press 8 Cu. Ft. Plate and Frame Filter Press Model: 800G32-16-8DYLW