Used Materials Testing in Gauteng, South Africa

MOT Straightedge (UTAS-2127)

Design and Testing of Bituminous Mixtures Product Codes: Description: The straightedge is used for measuring single irregularities attributable to quality defects in new surface course(s) of roads, airfields and ...

Travelling Beam Device (UTAS-2125)

• Manufacturer: Labequip

Design and Testing of Bituminous Mixtures Description: The UTAS-2125 Travelling Beam Device is used to check for any irregularities in both concrete and bituminous road surfaces. Deviation of the surface from a s...

Distance Pieces and Platens for Frames (UTCM-4630)

• Manufacturer: Labequip

Compression and Flexural Machines Product Code: Distance Pieces for Frame: Due to the modular design of the frames any sample with suitable size, load and pace rate can be test on both chambers by decreasing the ...

Corrosion of metals (CE 105)

principles of corrosion and corrosion protection on metallic materials Description: Corrosion damage to metallic components causes considerable economic and technical damages. The issue of corrosion and corrosion...

Drive unit for tribological investigations (TM 260)

base module for studying various cases of sliding and rolling friction Description: Tribology studies friction, wear and lubrication. Friction occurs when two solids are in contact with each other and their movem...

Rolling friction in friction wheels (TM 260.01)

frictional forces between two rolling friction wheels Description: In bearing and drive technology, dynamic friction occurs at the sliding and rolling points, which leads to power losses in the technical systems....

Dynamic friction in pin – disk (TM 260.03)

frictional forces between two sliding friction pairs Description: In bearing and drive technology, dynamic friction occurs at the sliding and rolling points, which leads to power losses in the technical systems. ...

Frictional vibrations (TM 260.04)

slip–stick phenomenon at the transition from static to dynamic friction Description: Friction is the resistance of a body against movement on a base. Static friction means that a body remains at rest under the ac...

Friction in journal bearings (TM 282)

fundamentals of hydrodynamic lubrication Description: There are many factors that influence the friction states in a hydrodynamic journal bearing. Speed, load and viscosity of the lubricant used are focused on in...

Torsion of bars (SE110.29)

• Manufacturer: Labequip

elastic torsion of a bar under a torque Description: Torsion occurs primarily on axles and drive shafts in motor vehicles and machines. The torsion occurring in the shaft cause cross-sections of the shaft to be p...

Investigation of simple stability problems (SE 110.19)

• Manufacturer: Labequip

representation of simple stability problems on a buckling bar Description: Buckling is a stability problem which occurs in practice when slim components are subjected to compressive loading. Following a “disturba...

Elasto-hydrodynamic behaviour (TM 260.02)

Elasto-hydrodynamic behaviour between the sphere and rotating-glass-plate friction pair Description: Elasto-hydrodynamic lubrication occurs in roller bearings, gear wheels and cam followers, whose contact surface...

Dynamic friction in cylindrical pin – roller (TM 260.05)

frictional forces between two sliding friction pairs Description: In bearing and drive technology, dynamic friction occurs at the sliding and rolling points, which leads to power losses in the technical systems. ...

Pressure distribution in journal bearings (TM 260.06)

depiction of radial pressure distribution in a journal bearing at different bearing gap widths Description: The field of tribology covers all forms of friction. Dry, mixed and fluid friction all occur in journal ...

Bearing friction (TM 232)

friction in slide bearings and roller bearings Description: Bearings can be classified as slide bearings or roller bearings depending on the nature of their motion. In slide bearings, there is a sliding motion be...