Used Materials Testing in Gauteng, South Africa

Hertzian pressure (TM 262)

• Manufacturer: Labequip

demonstration of the contact area under Hertzian pressure Description: When two bodies with a convex surface are pressed against each other, ideally, these bodies only come into contact linearly or at one or more...

Linear Shrinkage Mould (UTS-0235)

• Manufacturer: Labequip

Soil Classification The UTS-0235, Linear Shrinkage Mould is 140 mm long and 12.5mm radius and is used for the determination of the total linear shrinkage of soils, and indicates the plastic properties of soils wi...

Torsion of bars (SE110.29)

• Manufacturer: Labequip

elastic torsion of a bar under a torque Description: Torsion occurs primarily on axles and drive shafts in motor vehicles and machines. The torsion occurring in the shaft cause cross-sections of the shaft to be p...

Investigation of simple stability problems (SE 110.19)

• Manufacturer: Labequip

representation of simple stability problems on a buckling bar Description: Buckling is a stability problem which occurs in practice when slim components are subjected to compressive loading. Following a “disturba...

Mechanical Strain Gauge (UTC-3110)

• Manufacturer: Labequip

Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Product Codes: UTC-3110 Mechanical Strain Gauge 100 mm Measuring Base UTC-3130 Mechanical Strain Gauge 300 mm Mea...

Deformation of curved-axis beams (FL 170)

• Manufacturer: Labequip

elastic deformation of curved-axis beams Description: In construction engineering, a distinction is made between beams and arches. An arch is a statically indeterminate supported structure with a curved axis and ...

Buckling of bars (SE 110.57)

• Manufacturer: Labequip

demonstration of buckling in bars Description: Long and slim components such as bars, beams and columns are often subjected to compressive forces along their long axis owing to their function. Under the influence...

FULLY-AUTOMATED RESILIENT MODULUS UNIT (LoadTrac II-RM)

• Manufacturer: Geocomp

Advanced Soil Systems Geocomp’s LoadTrac II Resilient Modulus unit fully automates resilient modulus tests on base/subbase/subgrade materials. The LoadTrac II meets or exceeds all specifications for Resilient Mod...

UTEST Software (USOFT-4830.FPR)

• Manufacturer: UTEST

Compression Testing Frames Product Code: Description: The Automatic Compression/ Flexure Testing Machine can be controlled (Start, stop commands) by a computer with the software USOFT-4930.FPR (given free of char...

Melting Pot (UTC-1070)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Description: The Melting Pot is designed for melting capping compound, sulphur, wax and similar materials. The melted paraffin wax is used to seal soil samples and other m...

Advanced & Rugged Leeb Hardness Tester (LES-THL-280PLUS)

Converts to all common hardness scales (HV, HB, HRC, HRB, HRA, HS) Measuring range: 170~960 HLD (Impact device dependant) Accuracy: Display error ±4 HLD Conversions: HLD -HRC – HRB – HB – HV – HS Includes impact ...

TRL DCP – DYNAMIC CONE PENETROMETER (LES-DCP)

The TRL Dynamic Cone Penetrometer (DCP) Supplied by Laboratory Equipment Supplies is an instrument designed for the rapid in-situ measurement of the structural properties of existing road pavements constructed of...

Displacement Transducers & Dial Gauges (UTGM-0060)

• Manufacturer: Labequip

Measuring Instruments Product Codes: Description: Linear Potentiometric Displacement Transducer (LPDT) provides an electric signal proportional to the linear shaft displacement. UTEST supplies high quality Linear...

Consolidation (UTS-0300)

• Manufacturer: Labequip

Product Code: The UTS-0300 Front Loading Oedometer is rigidly constructed to ensure minimum frame distortion. The frame is designed to load the specimen through a lever arm assembly and one of three alternative b...

Vebe Consistometer (UTC-0560E)

Fresh Concrete Testing Product Codes: Description: UTC-0560E model consistometer conforms to EN 12350-3 for determining the consistency of fresh concrete by means of the Vebe time. The unit consists of a vibratin...