Used Processing in Victoria, Australia

2010 Knapp 3.3M LONG MOTORISED BELT CONVEYOR
- Manufacturer: Knapp
This conveyor is in great working condition. We have a few of these conveyors at different lengths so the picture may not represent the listed length as the same photos will be used for each one. Made in Germany
$2,912 USD
Campbellfield, Australia
2010 Knapp 2.9M LONG MOTORISED BELT CONVEYOR
- Manufacturer: Knapp
This conveyor is in great working condition. We have a few of these conveyors at different lengths so the picture may not represent the listed length as the same photos will be used for each one. Made in Germany
$2,912 USD
Campbellfield, Australia
MOTORISED ROLLER CONVEYOR 3M
- Manufacturer: MOTORISED ROLLER CONVEYOR
This conveyor is in good usable condition. It is powered by a 3 Phase SEW Eurodrive motor.
$2,647 USD
Campbellfield, Australia
Fire Protection Technologies 750L
- Manufacturer: Fire Protection Technologies
This tank is in good condition. It has a hole cut out on the bottom edge that would need to be either weld shut or have an outlet welded on. It was part of a fire safety system. It is made out of stainless steel.
$2,515 USD
Campbellfield, Australia
STAINLESS STEEL INSULATED JACKETED TANK MIXER 600L
- Manufacturer: STAINLESS STEEL INSULATED JACKETED TANK MIXER
This mixer is in great working condition. The tank is jacketed and insulated.
$6,617 USD
Campbellfield, Australia
SHORT MOTORISED ROLLER CONVEYOR 0.8M LONG
- Manufacturer: SHORT MOTORISED ROLLER CONVEYOR
This conveyor is in great working condition. It is a twin roller design, powered by two motors.
$1,456 USD
Campbellfield, Australia
Shii-Meei SM-707
- Manufacturer: Shii-Meei
This box taper is a very used machine but is still in usable condition. Runs off 240V power. Minimum Carton Size - 200 x 200 x 200 Maximum Carton Size - Infinity x 500 x 500
$1,059 USD
Campbellfield, Australia
STAINLESS STEEL TANK WITH COIL 750L
- Manufacturer: STAINLESS STEEL TANK WITH COIL
This tank is in good condition. It has a drop-in coil inside of it for heating or cooling. It is made out of stainless steel and it is sitting on top of a steel frame stand.
$3,309 USD
Campbellfield, Australia
2008 HIPEX PT115-18-2000
- Manufacturer: HIPEX
This heat exchanger is in good condition. We have 3 of these available for sale at the time of listing. Made from stainless steel. Made in Australia
$2,978 USD
Campbellfield, Australia
Transnorm System TS1500
- Manufacturer: Transnorm System
This conveyor is in good working condition. It is a solid and well built unit.
$3,970 USD
Campbellfield, Australia
MONARCH CENTRIFUGAL BLOWER FAN - 11KW
- Manufacturer: Monarch
This blower is in great working condition. We have three of these blowers available at the time of listing. It is a loose unit that you can install in your own housing. Driven by a Monarch 11kW 3 Phase motor.
$2,184 USD
Campbellfield, Australia
CENTRIFUGAL BLOWER FAN 3KW
- Manufacturer: CENTRIFUGAL BLOWER FAN
This blower is in great working condition. Driven by a Monarch motor.
$2,184 USD
Campbellfield, Australia
MOTORISED ROLLER CONVEYOR 2.6M LONG
- Manufacturer: MOTORISED ROLLER CONVEYOR
This conveyor is in good working condition. Some of the rubber loop belts would need to be replaced. It is powered by a 3 Phase SEW Eurodrive motor.
$2,845 USD
Campbellfield, Australia
NDZ 2.2M LONG STAINLESS STEEL MOTORISED ROPE ROUND BELT INCLINE CONVEYOR
- Manufacturer: NDZ
This conveyor is in good working condition. It needs new rope belts as the old ones have deteriorated. It is made out of stainless steel. Driven by a SEW Eurodrive motor. Belt Height-
$2,912 USD
Campbellfield, Australia
LARGE STAINLESS STEEL INCLINE BELT CONVEYOR 4000MM LONG
- Manufacturer: LARGE STAINLESS STEEL INCLINE BELT CONVEYOR
This conveyor is in great condition. It is solidly built and high quality. The covering is made out of stainless steel, the incline section has a cleated belt.
$5,823 USD
Campbellfield, Australia