New Processing in Gauteng, South Africa

Hand Operated Hydraulic Specimen Extruder (UTGE-0082)

Laboratory Testing The UTGE-0082 Hand Operated Hydraulic Extruder is designed for extruding specimens from 50mm (2”) to 125mm (5”) (outer dia.) shelby sample tubes and moulds such as proctor, CBR and marshall mou...

Motorized Hydraulic Specimen Extruder, Horizontal Type, 60 kN Capacity (UTGE-0084)

Laboratory Testing 2050x500x1250 (shipping) The UTGE-0084 Motorized Hydraulic Extruder, Horizontal Type, is designed for extruding specimens from 50mm (2”) to 125mm (5”) (outer dia.) shelby sample tubes and mould...

Motorized Hydraulic Specimen Extruder Vertical Type (UTGE-0086)

Laboratory Testing The UTGE-0086 Motorised Hydraulic Extruder, Vertical Type, is designed for extruding specimens from 50mm(2”) to 125mm(5”) (outer dia.) shelby sample tubes and moulds such as proctor, CBR and...

Jolting Table (UTCM-0890)

Strength Tests Product Code: Description: Jolting Table is used for compacting of cement specimens in 40x40x160 mm mould and consists of mould table seated on a rotating cam driven at 60 r.p.m. The falling height...

Curing Cabinet (UTCM-1100)

Strength Tests Product Code: Description: The UTCM-1100 Curing Cabinet is used for curing of cement, concrete or other cement-based mortar specimens. The curing cabinet provides (20 ± 1) °C temperature and over 9...

Test Jigs for Compression and Flexure (UTCM-4200A)

Compression and Flexural Machines Product Code: Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.

Tensile Adhesion Strength Test Apparatus (UTCM-4223)

Compression and Flexural Machines Product Code: Description: UTCM-4223 Tensile Adhesion Strength Test Apparatus can be fitted to the UTEST Cement Compression or Compression/Tension testing machines. This apparatu...

Marshall / CBR / Proctor Specimen Extruder (UTGE-0080)

• Manufacturer: Proctor

Field Inspection and Sampling The UTGE-0080 Extruder is designed to easily extrude specimens from marshall and CBR, standard and modified proctor moulds. The capacity of the extruder is 30 kN and is supplied comp...

Muffle Furnaces (UTD-1450)

Loss of Ignition Product Codes: Description: The UTD Series Muffle Furnaces are widely used for determining various properties of construction materials, and they cover a temperature range from 1100°C to 1600°C, ...

Heat Treatment Furnace (LES-P Range)

Model Cont. Temp CB/FT DEG C LES-42 P 0.42 3.1 1300 1250 3.3 1300 1250 4 1300 1250 LES-340 P 1250 Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated in th...

Muffle Furnace – Economy (LES-E Range)

The E (economy) range of Muffle furnaces have been designed without compromising any of the essential features associated with reliability and prolonged service life. The ruggedly constructed steel frame will end...

Muffle Furnace (UTD-1462)

Physical and Chemical Properties Product Code: UTD-1462 Muffle Furnace is used for determining the loss on ignition and insoluble residue of cement and building lime. Working temperature and time can be programme...

Automatic Programmable Mortar Mixer (UTCM-0885E)

Strength Tests The Automatic Programmable Mortar Mixers are supplied complete with: Bowl, 5 lt (approx.) Beater Product Code: Description: The mixers have been designed to mix mortars and cement pastes primarily ...

Manuel Mortar Mixers (UTCM-0875E)

Strength Tests The Manual Mortar Mixers are supplied complete with: Bowl, 5 L (approx.) Beater Product Code: Description: The UTCM-0875 Manual Mortar Mixer has a 5 litre (approx.) capacity, they have been designe...

Three Gang Mould (UTCM-0892.2)

Strength Tests Product Code: Description: All moulds have been manufactured from steel except UTCM-0898 moulded using engineered plastic and all internal surfaces are machined. Minimum surface hardness of UTCM- 0...