
2008 BOWEN 2.5
- Manufacturer: Bowen
Used Bowen S-85 powered by a C4.4 Caterpillar diesel engine. We have installed new seals, wash-pipe and packing in the swivel and serviced it. The engine has a rebuilt diesel injection pump, new starter and have ...
San Angelo, TX
2001 Bowen 2.5
- Manufacturer: Bowen
This is a used/refurbished Bowen 2.5 unit built by Precision Pump on 12-13-2001, powered by a Cummins BT 3.9 diesel engine s/n: 46082450. Hour meter shows 3301. We replaced the engine belt tensioner, belt and s...
San Angelo, TX
JOY WB 12
- Manufacturer: Joy
Rebuilt Joy WB 12 Booster Head. 5 1/2 bore, RH, rated for 150 hp, 7'' stroke, max 1100 psi discharge and 13000 max rod load. Located at Elliott Equipment in San Angelo, TX call us at 325-655-8933 for more informa...
San Angelo, TX
PART HOUSES
- Manufacturer: elliott equipment
15-foot parts houses with handrails equipped with lighting; Quantity: 2.
San Angelo, TX
SKYTOP BREWSTER 6SX POWER SWIVEL
- Manufacturer: Skytop brewster
- Model: 6SX
Sky top Brewster 6SX swivel Rental: No
San Angelo, TX
MCKISSICK Web-Wilson Hydra Hook
- Manufacturer: McKissick
Block & Hook Combos - McKissick 150-ton, 4 sheave drilling block. Equipped with a 150-ton Web-Wilson Hydra Hook. Grooved for 1 1/8-inch sheave.
San Angelo, TX
UNIT Traveling Equipment - Blocks
- Manufacturer: elliott equipment
Blocks - 150 TON UNIT DRILLING BLOCK – 4 SHEAVE, STOCK # 0580, 1 1/8 INCH WIRE ROPE
San Angelo, TX
SKYTOP BREWSTER Traveling Equipment - Sheaves
- Manufacturer: Skytop brewster
Sheaves - Sky Top Brewster 250-ton block with 5 sheaves with BJ 6250 unimatic hook; 1 3/8 inch groove
San Angelo, TX
IDECO BLOCK AND HOOK COMBO
- Manufacturer: Ideco
Blocks - IDECO 160 TON SHORTY BLOCK / HOOK COMBO – 4 GROOVE – GROOVE FOR 1 INCH
San Angelo, TX
GARDNER DENVER TB-200
- Manufacturer: Gardner Denver
Block & Hook Combos - 200 ton Gardner Denver block with 4 sheaves and BJ Unimatic hook.
San Angelo, TX
PROCESS UNITS/LINES 113827
Never Used Solvent Recrystallization Unit from Plant Process Equipment. Approximately 400 bbl/day throughput. The equipment was installed in 2020, but never run. Major pieces of equipment include: (8) scraped wal...
Cleveland, TX
PROCESS UNITS/LINES 107121
- Manufacturer: NEW ERA
"AS IS, WHERE IS" FOR REMOVAL AND RELOCATION; THIS COATER PROCESS IS INTENDED TO PRODUCE THIN, UNIFORM, COATINGS ON VARIOUS WEB SUBSTRATES IN A CLEAN ROOM ENVIRONMENT; AQUEOUS & FLAMMABLE LIQUID CAPABILITY; 50 T...
Cleveland, TX
PROCESS UNITS/LINES 96527
- Manufacturer: Gas Atmospheres
"AS IS, WHERE IS"; HYDROGEN SKID MFG. BY GAS ATMOSPHERES IN UNIT XIV; CAPACITY; 3000 SCFH H2; (72,000 SCFD); 99.8% PURITY; HYDROGEN PRESSURE: 350 PSIG; NATURAL GAS REQUIREMENTS: 750 SCFH FOR PROCESS; 650 SCFH FOR...
Cleveland, TX
PROCESS UNITS/LINES 114126
Used 36" Dia Distillation Tray Column System designed by Koch Process Technologies Inc. Column manufactured by Dusenbury Engineering Co; (40) Trays. 59'3" TT. Lower 7'3" section Hastelloy C276, Upper section 316L...
Cleveland, TX
PROCESS UNITS/LINES 102159
- Manufacturer: THERMATRIX
140 SCFM @ 30 BTU/SCF; CS; STANDARD ELECTRIC STRAIGHT THROUGH THERMAL OXIDIZER; MFG. BY THERMATRIX IN 2003; MODEL ES-100; MAXIMUM FLOW RATE FOR A LEAN FUME STREAM (VOC) IS 85 SCFM (AT 0 BTU/SCF) AND IS CAPABLE OF...
Cleveland, TX
Ingersoll Rand R11N Industrial Compressor
- Manufacturer: Ingersoll Rand
- Model: R11N
Good condition Ingersoll Rand R11N Industrial Compressors. Located in USA and other countries. Click request price for more information.
USA

