Used Threading & Tapping in Canada

TAPMATIC NCR-IA #10-1/2 TAPPIN UNIT

TAPMATIC NCR-IA #10-1/2 TAPPIN UNIT

BW GROUP Fastener Assembly machines

• Manufacturer: BW GROUP

Equipped With Specifications: •High Speed Cable Clip & Nail Assembly Machine (ZYJN) •Stainless Steel Cap & Self - Drilling / Tapping Screw Assembly Machine (ZYK) •Stainless Steel Cap & Long Self - Drilling / Tapp...

MACHINE PRODUCTS BM

• Manufacturer: MACHINE PRODUCTS

Equipped With These machines are for the manufacture of long screws & bolts, fully automatic from wire coil to finished product. A single machine, consisting of harmonized components, can perform the following op...

WAFIOS UNT12 (1/2")

• Manufacturer: Wafios

Equipped With Specifications: Features: * Tapping, Boring & Counter-boring of Special Nuts * Specially Suited to Thread Blind Borings & Extremely Long Parts * PLC Control & Process Tap Monitoring * Full Electroni...

BRANKAMP Process Monitors

• Manufacturer: BRANKAMP

Equipped With Process Monitors For use with * Cold Headers * Multi-Die Cold Formers * Thread Rolling Machines * Stamping Punch Presses * Forging Presses Featuring: * Easy to Use Handling & Installation * Force & ...

1989 NUTAP MAS-08NV

• Manufacturer: Nutap

Maximum thread diameter: 8 millimeters | Minimum thread diameter: 4 millimeters | Biggest flange or max. outside dia.: 15 millimeters | Production rate: 15000 - 21000 Pcs/Hr

AMBA Hydraulic Rod Header

• Manufacturer: AMBA

Equipped With Specifications: * Six Models: Size Range: 10 - 20mm Features: These machines are suitable for Upsetting, Extruding, Collar Work, Etc. A single machine can perform the following operations fully auto...

ROD CHOMPER HRH

• Manufacturer: ROD CHOMPER

Equipped With These machines are suitable for Upsetting, Extruding, Collar Work, Etc. A single machine can perform the following operations fully automatically: ? Cutting of up to a 12 mm | 0.5 ? diameter rod ? P...

PRUTTON 125B-HV

• Manufacturer: Prutton
• Model: 125B-HV
• Threading length: 76.19999999999999 millimeter

Equipped With * Twin Ferris Wheel Feeder Drums Max. diameter: 1/4" | Max. thread length: 3" | Underhead blank length: 3" | Speed: 600-800 ppm (up to 1800ppm w/air jet feed) | Hopper capacity: 120 lbs

1975 National 6L4

• Manufacturer: National
• Model: 6L4
• Threading length: 44,449.99999999999 millimeter

Maximum cutoff diameter: .375 inches | Number of dies: 4 | Maximum cutoff length: 4.5 inches | Maximum kickout length: 3.125 inches | Minimum kickout length: .750 inches | Minimum cutoff length: .875 inches | Ma...

3/4″ National 4DIE BOLTMAKER

• Manufacturer: National
• Model: 3-4
• Threading length: 78 millimeter

Equipped With Max cutoff diameter: 22 mm (.866") | Min/max kickout: 30 - 160 mm (1.181" - 6" | Min/max cutoff length: 38 - 200 mm (1.496" - 7.874") | Max thread length: 78 mm (3") | Max output: 90 PPM | Heading l...

National 10L4

• Manufacturer: National
• Model: 10L4

Equipped With * IFO Transfer Location: Number of dies: 4 | Number of stations: 5 | Maximum wire diameter: 5/8" | Maximum length underhead: 4-3/8" | Min. length underhead: 1-1/8" | Max. cutoff length: 5-3/4" | Min...

National 3/4″ x 7″

• Manufacturer: National
• Model: 3-4

Equipped With Features: PKO Trim Maximum cutoff diameter: 1 inches | Maximum wire diameter: .750 inches | Maximum cutoff length: 10 inches | Minimum cutoff length: 1.5 inches | Maximum kickout length: 7 inches | ...

YOSHIHARA YT-3NH

• Manufacturer: Yoshihara

Yoshihara YT-3NH Automatic Bolt Trimmer Nominal shank dia: 0.314" - 0.393" | Max across flats: 0.551 in | Shank length: 2.362 in | Productivity: 150-220 pcs/min.

6 in. Oster Pipe and Bolt Threader, Model 716

6 inch "Oster" pipe and bolt threader, Model 716 Model (Cat. No.) 716 Headstock mounted push button control Heavy duty three phase motor, It's now in our heated warehouse, and can be shipped on two days notice. I...