Used Processing in Victoria, Australia

2022 Multivac UNUSED R245 Thermoformer complete line R245 - SUIT NEW BUYER- save $$$$$
- Manufacturer: Multivac
- Model: R245
AS NEW UNUSED - SUIT NEW BUYER Multivac R245 and Bizerba weigh labeller at this stage the metal detector is not for sale but if any client was to require the complete line then would sell as a complete line. Th...
Melbourne, Australia
REEVES 2500
- Manufacturer: Reeves
High speed disperser with 2500 litre mild steel tank. 18.5kW, 50Hz, 400/440V, 34/32A Ex. Rated Western Electric motor with REEVES variable speed drive. Mild Steel Shaft with SS blade. Tank has a sloped bottom to ...
Melbourne, Australia
REEVES 150
- Manufacturer: Reeves
High Speed Disperser. (Ex. Rated) Pneumatically raised and lowered. Reeves variable speed drive with WEG Ex rated motor. Platform has a backstop for paint pot to be secured to. Disperser complete with Ex. starter...
Melbourne, Australia
SS 750 x 3
- Manufacturer: SS
Incline flat belt conveyor. Stainless steel design with food grade belt. Complete with 4 x air fans mounted above the conveyor. 750mm wide x 3 m long .75kw 28 rpm VSD control Adjustable feet.Currently set up ...
Melbourne, Australia
REEVES 150
- Manufacturer: Reeves
High Speed Disperser. (Ex. Rated) Pneumatically raised and lowered. Reeves variable speed drive with Ex rated motor. Platform has a backstop for paint pot to be secured to. Disperser complete with Ex. starter con...
Melbourne, Australia
FLEXLINK 5 x 300
- Manufacturer: FlexLink
Plastic slat food grade conveyor. 5m long x 300mm wide conveyor bend at one end. Aluminium frame on castors. Complete with SEW geared drive .55kw 60 rpm 850mm high from ground. Ex confectionery plant.
Melbourne, Australia
WINEQUIP QH-TL6B
- Manufacturer: WINEQUIP
Winequip - Plate Heat Exchanger. Heat exchanger area: 3.8m2 | Max design temp: 110C | Max working pressure: 1.6MPa | Plate material: AISI 304 / 0.5mm | Gasket material: NBR
Melbourne, Australia
BUFFALO RA-25-HSS
- Manufacturer: Buffalo
Large heavy duty stainless steel dual stage hammer mill. Complete with feedchute, duscharge chute, St/Steel dust collector and control board. The two hammer mills can be run into each other (dual stage) or run as...
Melbourne, Australia
DCE UMA 153 G3
- Manufacturer: Donaldson / Torit / DCE
- Model: UMA
Used DCE Unimaster Dust Collector with automatic timed shaker. Filter Area 150ft2 / 13.94m2 Explosion Relief Side Hatch. 80 Litre Dust Bin. Unit runs well.
Melbourne, Australia
DCE UMA 153 G3
- Manufacturer: Donaldson / Torit / DCE
- Model: UMA
Used Dust Collector with automatic timed shaker. Filter Area 150ft2 / 13.94m2 Unit runs well.
Melbourne, Australia
CONTECH ENGINEERING 3.1 x 300
- Manufacturer: CONTECH ENGINEERING
Mild steel conveyor with food grade plastic belt. 0.55kw SEW 19 rpm geared drive. Complete with pneumatic arm to push product off the conveyor from the side. Conveyor deck height is 950mm from ground. Mounted on ...
Melbourne, Australia
FRESCO SYSTEMS 30
- Manufacturer: FRESCO SYSTEMS
Fresco systems stainless steel screw feeder with mixer. 0.37kw Geared motor @ 56RPM Mixer 0.55kw Geared motor @ 42rpm Auger Total Screw Length 1000mm long
Melbourne, Australia
DCE UMA 104 G3
- Manufacturer: Donaldson / Torit / DCE
- Model: UMA
DCE Unimaster UMA 104 Dust Collector. 3 Phase, 380 - 415 V, 1.5 kW Mechanical bag shaker for cleaning filters. Run and tested. Unit in good condition.
Melbourne, Australia
Barry Brown 1000
- Manufacturer: Barry Brown
- Capacity: 1,000 liter
1000 Litre insulated heating tank / kettle. Food grade stainless steel. Closed top. 3 Phase, 415V, 30kW. 4 x 7.5kW Ceramic bobbin heating elements in total. 3 in working order. (1 element is unserviceable) Elemen...
Melbourne, Australia
ALFA LAVAL BRPX 617
- Manufacturer: Alfa-Laval
- Model: BRPX
Alfa Laval BRPX 617 Clarifier - Max bowl speed 4180 RPM, rated @ 30,000 LPH, sludge cap 25.7 L. Self-cleaning design, (requiers a 45 KW motor 380/660/3/50/1472 RPM), sludge tank, some tools, and manuals. Very goo...
Melbourne, Australia