Used Processing in Poland

2021 RYCSYSTEM

• Manufacturer: RYCSYSTEM

The bottling line is used for automated dosing, then filling and labeling of liquid products. These can be food products such as juices and beverages, as well as other products (chemicals, cosmetics, pharmaceutic...

2020 WENZHOU FURI MACHINERY CO. LTD. FRTB-SD3-C

• Manufacturer: WENZHOU FURI MACHINERY CO. LTD.

DIGI AW-5600FX

• Manufacturer: DIGI

DIGI AW-5600FX packaging machine

2020 AULONA MACHINERY S.r.l MPB – 25

• Manufacturer: AULONA MACHINERY S.r.l

2022 TOYO MACHINERY&METAL CO., LTD. Japonia Si-350-6S/JH750E

• Manufacturer: Toyo

Clamping force: 3430 kN | Screw diameter: 60 mm | Injection speed: 300 mm/s | Injection pressure: 220 MPa | Control: SYSTEM 800, Euromap 67, Euromap 73 interface

2019 HAITIAN JUPITER JU III 5500 / 3430

• Manufacturer: HAITIAN

Screw model ϕ 80 mm B Clamping force: 5500 kN | Injection weight: 1830 g | Injection pressure: 159 MPa | Installed power: 59 Kw | Max mold height: 900 mm | Ejector stroke: 250 mm | Ejector force: 110 kN | Mold op...

2021 GUDEPOL GD-SMART 11/10

• Manufacturer: GUDEPOL

Motor power: 11 kW | Maximum pressure: 10 bar

2000 ATLAS COPCO GA200 Screw Air Compressors

• Manufacturer: Atlas-Copco
• Model: GA 200

pressure: 16 (max 8) bar hours: approx 72000 (doc/general) inverter: no built in dehumidifer: no exchanger: no air/water cooled: no

1988 ATLAS COPCO GA1108 Screw Air Compressors

• Manufacturer: Atlas-Copco
• Model: GA 1108

hours: approx 5670/7506 (doc/general) inverter: no built in dehumidifer: no exchanger: no air/water-cooled: air

2013 BOGE C15 D Screw Air Compressors

• Manufacturer: Boge
• Model: C15

hours: 11276/12101 (doc/general) inverter: no built in dehumidifer: yes exchanger: yes air/water-cooled: air water

2012 WELLTEC TTI 380 SE Injection Moulding Machine

• Manufacturer: Welltec
• Model: TTI-380

Screw 70 mm. Tie bar clearance 740 x 740 mm. Shot weight approximately 1100 g. Injection pressure 180 bar. Injection speed 163 cm3/s. Screw r.p.m 175 r.p.m. Number of ejectors 13 pcs. Minimum form height 250 mm. ...

A complete

Injection moulding machine: 65 mm screw, approximately 929 cm3 injection. Gauge between tie bars 680 x 680 mm. Equipped with a servomotor controlled by a KEB inverter. 14,000 operating hours. Equipped with a drye...

2009 Ozgulmak HD

• Manufacturer: Ozgulmak

Blade widths:65-400mm. Number of layers/screws:1. Screw length: 950mm. Head diameter: 140mm. Roller width:400mm. Capacity (approximate) / hour: 20kg. Minimum - maximum thickness in microns: 0.025-0.15. Possibilit...

2016 KANG CHYAU Industry KMT-55CE

• Manufacturer: KANG CHYAU Industry

Blade widths: 400-1000mm. Number of layers/screws:1. Screw length: 2070mm. Head diameter: 240mm. Roller width: 1100mm. Capacity (approximate) / hour: 35 kg. Minimum - maximum thickness in microns: 0.011-0.2. Poss...

2002 ANG 100/2000

• Manufacturer: ANG

Blade widths: 1000-2400mm (with tabs). Number of layers/screws: 1. Screw length: 3500mm. Head diameter: 320mm. Roller width: 2000mm. Capacity (approximate) / hour: 150 kg. Minimum - maximum thickness in microns: ...