Used Processing in Pennsylvania, USA

1988 180,000 CFM PANGBORN BAGHOUSE (NCO)

• Manufacturer: Pangborn

Inventory id: 10833800100 | Capacity: 180,000 | Capacity per compartment: 13,850 | Type (shaker / reverse air / pulse air): REVERSE AIR | Number of compartments: 14 | Number of bags per module: 64 | Total number...

30,000 CFM TWIN CITY MODEL BCN-SW BLOWER

• Manufacturer: Twin City

Inventory id: 20027300000 | Capacity: 30,000 | Pressure: 70 | Air/material handling/dust: AIR | Wheel dia: 66 | Drive type (direct/belts pulleys): DIRECT | Motor hp: 500 | Motor rpm: 1785 | Motor volts: 2300/416...

1999 3000 CFM ULTRAFILTER MODEL HRE3000 INDUSTRIAL DESSICANT DRYER, USED AIR COMPRESSORS AND DRYERS, USED AIR COMPRESSORS AND DRYERS

• Manufacturer: Ultrafilter

Inventory id: 20033100000 | Capacity: 3000 | Pressure: 100 | Length: 120 | Width: 70 | Height: 130 | Weight: 10,600

2017 23.62" WIDE X 18'-11" LENGTH INDIVIDUALLY DRIVEN ROLLER TABLE

• Manufacturer: Sumitomo

Inventory id: 20053700000 | Table width: 23.62 | Roll face: 23.62 | Roll diameter: 9.5 | Length: 18'-11" | Drive arrangement: INDIVIDUALLY MOTOR DRIVEN | Number of rolls: 3 | Roll spacing: 59 | Roll fabrication ...

96/107.5 MVA, 34,500 PRI, 510.7-912.3 SEC, ABB FURNACE TRANSFORMER

• Manufacturer: ABB

Inventory id: 20061900000 | Power rating: 96/107.5 | Primary voltage: 34,500 | Secondary voltage: 510.7 - 912.3 (18 TAPS) | Load tap changer: YES | Phase: 3 | Hertz: 60 | Age: 1984 | Impedance percentage: 2.6% /...

2008 WHIRL AIR MODEL 800 BLENDER / TRANSPORTER

• Manufacturer: WHIRL AIR

Inventory id: 20037600000 | Material to be conveyed: ANTHRACITE COAL | Conveyor drive available (yes or no): NO | Gearbox available (yes or no): NO | Overall height: 132 | Feature 1: 3" OUTLET CONVEYOR CONNECTIO...

12" (305 MM) DIA. DEZURIK KNIFE GATE DUST COLLECTOR VALVE

• Manufacturer: DEZURIK/SARTELL

Inventory id: 10997800000 | Size diameter: 12 | Type valve (butterfly, mixer, gate, etc): KNIFE GATE | Application: DUST COLLECTOR

1983 150 HP, 1150 RPM, 250V, TOSHIBA, SA-2095-KCKM, SHUNT USED DC MOTOR

• Manufacturer: Toshiba
• Model: DC250

Inventory id: 10722100000 | Horsepower: 150 HP | Speed: 1150 RPM | Voltage: 250 VOLT | Frame: 2095-KCKM | Winding: SHUNT | Enclosure: BV | Shaft: SESS | Amperage: 499 | Bearings: A/F | Field voltage: 220 | Degre...

25" (635 MM) WIDE RAPISTAN BELT CONVEYOR

• Manufacturer: Correa

Inventory id: 20069200000 | Table width: 25" (2 X 10" BELTS | Roll face: 25" | Length: 9'-0 | Drive arrangement: MOTOR DRIVEN | Previous use: CLADDING LINE | Overall length: 112 | Overall width: 32 | Overall hei...

2010 and 2011 Revent 724G Gas Double Rack Oven

• Manufacturer: Revent

Beautiful 2010 and 2011 Revent 724G gas double rack ovens in stock. Price listed is for ovens fully cleaned, including burner, gas valve, spark rod, flame rod all replaced. Door sweep and gaskets along w/ rack ...

2011 (2) 107' (32,614 MM) LONG X 86" (2185 MM) WIDE UNUSED POLYPROPYLENE PICKLE LINE TANKS

Inventory id: 20068300000 | Entry coil width max: 86" | Age comments: NEVER INSTALLED | Material: POLYPROPYLENE | Features 1: FABRICATED PLASTIC SUB PLATES INCLUDED | Features 2: NEVER INSTALLED | Features 3: RE...

1983 52 X 216 INGERSOLL MILLER PLANER, SIDE AND END CUT SAW 75 HP CHIP CONVEYOR SLOTTING CUTTER

• Manufacturer: Ingersoll Rand
• Model: HP75

Inventory id: 10033900000 | Number (size): 52 | Slab thickness min: 2 | Slab thickness max: 8 | Slab width min: 26 | Slab width max: 52 | Slab length max: 18 | Slab weight max: 10,000 | Material (steel/copper/al...

1993 50 FT. INDIVIDUALLY DRIVEN ROLLER TABLES (NCO)

• Manufacturer: Simac

Inventory id: 20081500200 | Roll face: 31 1/2" FACE | Roll diameter: 10 1/2" DIAMETER | Number of rolls: 11 ROLLS | Gearbox ratio: 56.123/1 REDUCER | Motor hp: 1 HP | Motor rpm: 1750 RPM | Motor voltage type (ac...

2013 FURNACE PEEL BAR FOR 6 1/4" SQUARE BILLET 38 FT LONG

• Manufacturer: SMS / MEER

Inventory id: 20090300500

1993 63 FEET OF INDIVIDUALLY DRIVEN ROLLER TABLES FOR ANGLES, CHANNELS, AND FLATS

• Manufacturer: Simac

Inventory id: 20081800100 | Roll face: 31.5" | Roll diameter: 10.5" | Number of rolls: 16 | Gearbox ratio: 31.36 / 1 RATIO REDUCER | Motor hp: 1 HP | Motor rpm: 1760 RPM | Motor voltage type (ac / dc): AC

Atlas-Copco ZT 90 Industrial Compressor

• Manufacturer: Atlas-Copco
• Model: ZT 90

Good condition Atlas-Copco ZT 90 Industrial Compressors manufactured in 2004. Located in France and other countries. Click request price for more information.