Used Processing in Canada

Donaldson air Filter Unit DWS4

• Manufacturer: Donaldson / Torit / DCE

-Shipping: 59” length x 50” width x 102” height -Electrical: 208/203/460/60/3 -Motor HP: 5 HP -Filter part number: P191920-016-910 -Model: DWS4

Alfa Laval Plate Heat Exchanger with a Grundfos Pump

• Manufacturer: Alfa-Laval

-Plate heat exchanger: Model: M6-MFM -1.0/1.3 MPA @ 145 DEGC Capacity -Serial number: 3011-83-225 -Grundfos Pump: -Model: A96559794P10833 -Serial number: 0001 -HP: 3 -1850 GPH -Head: 280 ft -Total dimensions: -He...

thermal Transfer air Cooler for air compressor 2 of 2 partner is B1129

-Brand new in box -Maximum air pressure of 250 PSI and temperature of 350 F -Model number is AA65-1 Series -In wood crate

Thermal Transfer air Cooler for air compressor

• Manufacturer: Thermal transfer products ltd.

-Brand new in box -Maximum air pressure of 250 PSI and temperature of 350 F -Model number is AA65-1 Series -In wood crate

GROEN Electric Tilt Kettle

• Manufacturer: Groen

CATEGORY: Kettles Model TDB-1-20 qt 50 psi @ 290 F 208 volt, 3 phase 6.3 kw CRN-B4009.5 5.5 Imperial gallons

560 Litres open top plastic tank

-Nipple on bottom is 1/2" -Open top -Nipple on side is .5" -31" diameter -43.5 height -125 imp gall

Stainless Steel Pressure Tank

• Manufacturer: INDX Tech Canada

6" dia x 34" long 3.5 Imperial Gallons MAWP - 300 psi @ 250 F MDMT - -20 @ 300 psi INDX TECH CANADA CRN - OHO 2832.6 side mounted sight glass LAST USE: OIL COOLING TANK

7,169 Litres steel tank

-Tank dimensions: 145" tall x 62" -Cone bottom with a 3" drain -Top with lid -On steel legs

Littleford Mixer

• Manufacturer: Littleford

-Shipping dimensions of unit: 76” width x 111” length x 79” height -Base: 38” width x 82” length x 57” height -Model FKM-600-D -Jacketed with 75 PSI -Seimens motor: 15 HP, 230/ 460 V, 1760 RPM -Baldor motor: 10 H...

Air Dryer

• Manufacturer: Dvair

Model: U031-281TT serial#: 13053589933-12 -Max GPD: 24 -PSI: 80 -50/60 HZ -1.40 A -tested on Dec 12/ 22, works great

Filter Regulator

• Manufacturer: SMC

-Shipping dimensions: 3" L x 3" W x 10" H -Set press 7~100psi -Max press 150 psi -Max temp 140 F

7,169 Litres steel tank

-Tank dimensions: 145" tall x 62" -Cone bottom with a 3" drain -Top with lid -On steel legs

68 Litres standing tank

-Stationary -Flat bottom -With half closing lid -Legs are 30" -51" tall -Stainless steel

Scott Equipment co. hammer mill SH18-12

• Manufacturer: Scott

-Model: SH18-12 -Baldor motor: 5HP, 1725 RPM, 208-230/460 Volts -Shipping dimensions: fits on a skid, sits 21" tall -Inlet is 27" x 20"

Sasso Flat Stone Equipment

• Manufacturer: Sasso
• Model: Flat

Good condition Sasso Flat Stone Equipment available between 2015 and 2020 years. Located in USA and other countries. Click request price for more information.