Used Presses

BLISS MODEL CH-45 GAP FRAME PRESS & LITTELL BACK END BLISS MODEL CH-45 PRESS LITTELL MODEL 20-12 REEL LITTELL WIRE STRAIGHTENER

• Manufacturer: Bliss
• Model: CH-45

The BLISS Model CH-45 Gap Frame Press, coupled with LITTELL back-end equipment, is a reliable choice for various industrial applications. This used but well-maintained setup includes the BLISS Model CH-45 Press, ...

Parker-Hannifin 120 Ton Twin Column Hydraulic Straightening Press

• Manufacturer: Parker Hannifin
• Stroke length: 279.4 mm
• Daylight: 457.2 mm

120 Ton HPM / Parker - Hannifin Twin Column Hydraulic Straightening Press Movable fixturing that can move with the head or disengage from the head has been added 2-Axis Traveling Gantry Type All Steel Weldment...

12 Ton Multipress M6P-12 C Frame Hydraulic Press

• Capacity: 12,000 kg
• Stroke length: 304.8 mm

12 Ton Multipress MSP-12, 12" stroke, 18" Daylight, 7.5 HP, Similar to the classic Denison M6P-12 Gap Frame Hydraulic Press, Made in America Cylinder: Standard Machines Available in 2-4 weeks Specifications are a...

Sonitek UAP-5 Heat Staking Press

Sonitek UAP-5 Heat Staking Press, S/N SP-1312, Ultra System Controller

1966 Denison 10 ton press

• Manufacturer: Denison

Denison 10 Ton Multipress has a 6 Position indexer and Light Curtains. 6 Position indexer Light Curtains Stroke 12" 10HP Daylight 18 Throat 10 Ram Dia 2.5 Motor 1800 RPM 20 GAL 440 V 3 Phase 60 HZ

6 Ton Multipress M6P-6 C Frame Hydraulic Press

• Capacity: 6,000 kg
• Stroke length: 304.8 mm

6 Ton Multipress MSP-6, 12" stroke, 18" Daylight, 5 HP, Similar to the classic Denison M6P-6 Gap Frame Hydraulic Press, Made in America Cylinder: Standard Machines Available in 2-4 weeks Specifications are accura...

VINCENT MODEL KP-16 S SCREW PRESS SCREENS (2) AVAILABLE UNUSED

• Manufacturer: VINCENT

904674 Two (2) Unused screw press screens for a Vincent Model KP-16S screw press. Screens were built with a Hendricks B-9 profile bar with a slot width of .025".

20 Ton PH Hydraulics OGF-20 C-Frame Hydraulic Press

• Capacity: 20,000 kg
• Daylight: 609.6 mm

20 Ton PH Hydraulics Model OGF-20, 18" str., 24" DL, 24" x 22" bed, #29268 USED 20 TON PH HYDRAULICS HYDRAULIC C-FRAME PRESS With 2 post guided slide Model OGF-20 Floor standing 30 HP 1765 RPM 230/460/3/60 motor ...

Janesville Tool EC-66 Pneumatic Press

Janesville Tool EC-66 Pneumatic Press

Bench Top Pneumatic Press

Bench Top Pneumatic Press, Keyence GL-SP5P Light Curtains, Banner Touch Buttons w/ Rolling Table

600 Ton Hydraulic Dishing Press

• Stroke length: 1,700 mm
• Daylight: 2,200 mm

Force: 600 Ton | Working pressure: 220 kg/cm² | Stroke - up/down: 900 mm | Stroke - right/left: 1,700 mm | Daylight: 2,200 mm | Bolster: 5,500 / 1,500 mm | Pressing speed: 4 mm/second | Down speed: 100 mm/second...

2002 Used 40 Ton Greenerd #HCA-40-30R8 Hydraulic C Frame Press

• Manufacturer: Greenerd
• Capacity: 40,000 kg
• Daylight: 914.4 mm

40 Ton Greenerd #HCA-40-30R8, 24" str., 36" DL, 26" x 15" bed, 32" x 16" bolster, 2002, #29493 USED 40 TON GREENERD #HCA-40-30R8 HYDRAULIC C FRAME PRESS With 4 post guided slide New 2002 Model HCA-40-30R8 Floor s...

15 Ton Multipress M6P-15 C Frame Hydraulic Press

• Manufacturer: Multipress
• Capacity: 15,000 kg
• Stroke length: 304.8 mm

15 Ton Multipress MSP-15, 12" stroke, 18" Daylight, 10 HP, Similar to the classic Denison M6P-15 Gap Frame Hydraulic Press, Made in America Cylinder: Standard Machines Available in 2-4 weeks Specifications are ac...

Lauffer RPS160

• Manufacturer: Lauffer
• Capacity: 176,000 kg
• Stroke length: 200.66 mm

LAUFFER RPS160 176 TON HYDRAULIC STRAIGHT SIDE PRESS 176 Ton LAUFFER RPS160, Hydraulic, 7.9" Str, 19.7" DL, 39.3" x 31.5" Bed, Hyd. Ejector w/ 2" Str, Hyd. Draw Cushion, Die Setup Included Die Setup Included Ram....