Used Molding Presses in Italy

MILLUTENSIL PRESS MOD.MIL 143

• Manufacturer: Millutensil

MILLUTENSIL 10128 MILLUTENSIL MIL 143 MOLD TESTING PRESS Useful table length mm 1400 Useful width of table mm 1200 Max passage between columns on length mm 1540 Max passage between columns on the width mm 1300 T-...

PROOFING PRESS PFC PR2

PFC 09950 USED MOLD TESTING PRESS Removable and tilting table Closing force max Ton 20 Max opening force Ton 10 Upper table dimensions mm 750x1100 Lower table dimensions mm 750x1100 Opening min max 85- 985 Movabl...

1995 UTAS GR3 Mold Testing Press

Mold Testing Press UTAS GR3 year 1995 with control unit, cycle programming keyboard, wax injector device.

GALATO T35 TL/V-SM PRESS

• Manufacturer: Galato

GALATO 09935 C-NECK PRESS Nominal force: 350 kN Adjustable stroke: 11-78 mm Strokes per minute: 122 Slide adjustment: 50 mm Clearance at bottom dead center: 275 mm Maximum clutches per minute: 35 Maximum flywheel...

Mold Testing Press UTAS GR2

Max closing force: 200/400 KN | Max opening force: 100/200 KN | Plan size: 750x1100 mm | Max mold weight: 5000 kg | Upper mold max weight: 2000 kg | Closing/opening speed: 50/65 mm/sec | Closing/opening pressure...

MOSSINI PRESS 250 TON

• Manufacturer: Mossini

MOSSINI 10141 MOSSINI OLEODYNAMIC PRESS mod. PO/2M/P 250 Nominal force Ton 250 Slide stroke mm 1,000 Worktable dimensions mm 2,500 x 2,000 Max. workpiece dimensions mm 2,400 x 1,900 Max. workpiece weight kg 5,000...

SCHULLER 800 TON TWO-UPRIGHT MECHANICAL PRESS Product code: 33477

• Capacity: 800,000 kg
• Stroke length: 650 mm

Hurry up! This product has already been viewed 564 times! Don't miss it! SCHULER 800 TON construction CAPACITY PUSH POINTS SLIDE RUN VERTICAL LAMP FROM the mold trolley, BROA REGULATION SLIDE SIZE SLID...

BENELLI T100 PRESS T100 TYPE PE/100/R/1P/S

• Manufacturer: Benelli

BENELLI PRESS T100 – Serial 1302 – TYPE PE/100/R/1P/S Mechanical press BENELLI T100, serial number 1302, model PE/100/R/1P/S, suitable for stamping, punching and processing precision mechanics. Solid and reliabl...

2006 Millutensil MIL 203

• Manufacturer: Millutensil

MILLUTENSIL MIL 203 mold testing press year 2006 Max closing force: 1500 KN | Max opening force: 350 KN | Plan size: 2000x1500 mm | Max mold weight on the bottom plane: 30000 kg | Max mold weight on the top plate...

FIXED PISTON PRESS 200 TON 3300 x 1000 ton 200 H 1000mm. Under mold 650mm approx. product code: 29712

Hurry up! This product has already been viewed 1784 times! Don't miss it! PISTON COMPRESSOR WITH FIXED CYLINDER 200 TON 3300 x 1000 ton 200 approx H from floor to upper point 1000mm. Die cavity about ...

PRESSA PRESSIX T65 CNR4

• Manufacturer: Pressix

PRESSIX 10425 C- Clamp Press Nominal force: kN 650 Weight: Kg. 5,000 Strokes per minute: N° 73 Max inserts per minute: N° 36 Operating air pressure min./max.: BAR 4÷5.5 Stop time: s 0.154 Safety distance: mm 246 ...

TCS 300 TON MOLD TEST

TCS 10164 Closing force 300 Ton Moving plane opening force 100 Ton Operating pressure 250 bar Platen overall dimensions 3,500 x 2,500 mm Minimum mold size (at max. clamping force) 2,800 x 2,000 mm Minimum clearan...

Plastic injection machines and equipment

Lot Lot consisting of: - Plastic injection press, SANDRETTO brand, type SERIE NOVE T 430/125, complete with Robot, temperature controller, Cooler, mold shapes and Moretto Granulator. Consult the Lot 1 PDF docume...

Provastampi product code: 24800

• Manufacturer: Provastampi

Hurry up! This product has already been viewed 3058 times! Don't miss it! Provastamps assembled front drawer carriage in good conditionB) Good in good working order, which can be seen connected and f...