Used Machine Tools in Canada

Trusted Seller
Auction
GOULDS Pump back pullout (Loc. Bldg 16 Warehouse store-Rack A2/D)
- Manufacturer: Goulds
GOULDS Pump back pullout (Loc. Bldg 16 Warehouse store-Rack A2/D)
Vaughan, Canada
Visit Auction Website
Trusted Seller
LEWIS 2CV5
- Manufacturer: Lewis
- Model: 2CV5
Equipped With Feed Speeds (Reeves V.S. Drive): 65 to 250 FPM
Vaughan, Canada
Trusted Seller
LEWIS 8F
- Manufacturer: Lewis
- Model: 8F
Equipped With Maximum wire diameter: .375 inches | Minumum wire diameter: .156 inches | Maximum cutoff length: 25 feet | Main motor: 25hp | Feed speed: 110-200 fpm
Vaughan, Canada
Trusted Seller
LEWIS 2SV5
- Manufacturer: Lewis
- Model: 2SV5
Equipped With Maximum wire diameter: .313 inches | Minumum wire diameter: .062 inches | Maximum cutoff length: 10 feet | Feed speed: Speed Range: 65 - 400fpm | Main motor: 15hp | Weight (approx): 3300 pounds | Di...
Vaughan, Canada
Trusted Seller
BRANDT RMG Wire Payoffs RMG Wire Payoffs
- Manufacturer: Brandt
Equipped With Wire coils up to 7,000 lbs, 70" dia. tables. Wire coils up to 4,000 lbs, 60" dia. tables. RMG Vertical Payoff: Wire Dia: 0.050"(1.25mm) to 0.188"(4.75mm) > High performance wire payoff with no elect...
Vaughan, Canada
Trusted Seller
LEWIS 10F
- Manufacturer: Lewis
- Model: 10F
Equipped With Maximum wire diameter: .625 inches | Minumum wire diameter: .313 inches | Maximum cutoff length: 4 feet | Feed speed: 90 - 165 FPM | Weight (approx): 13500 pounds
Vaughan, Canada
Trusted Seller
1998 RMG 14
- Manufacturer: RMG
- Model: 14
Equipped With Wire diameter: .050" - .250" | Maximum cutoff length: 11' | Fpm max speed: 400fpm | Arbor motor: 7.5 hp | Electrics: 460V/3/60
Vaughan, Canada
Trusted Seller
2025 Vertex VSJ
- Manufacturer: Vertex
The 2025 Vertex VSJ is a versatile and robust solution designed for machine accessories, specifically in adjustable supports and screw jacks. Manufactured by Vertex, this new model prioritizes reliability and pre...
$184 USD
Cambridge, Canada
Automatic impulse sealer By Wing Cheong Engineering (HK) Ltd.
2 station manual turn table semi automatic impulse sealer By Wing Cheong Engineering (HK) Ltd. 14" X 19" max sealing area Good working machine. 110 V power and compressed air. Model No. : W118 Size of Pressing Bo...
$515 USD
Toronto, Canada
Trusted Seller
2″ Wilden P-Series Pump Muffler & 1 1/2″ Graco Husky 1590 Muffler
- Manufacturer: Graco
2″ Wilden P-Series Pump Muffler & 1 1/2″ Graco Husky 1590 Muffler ***All Air Parts are Non-Returnable***
Pickering, Canada
Trusted Seller
Muffler Plate
- Manufacturer: Seal-Rite
Muffler Plate for Wilden P4/P8 Pump. *Does not include the gasket – get it here! ***All Air Parts are Non-Returnable***
Pickering, Canada
Trusted Seller
Muffler for 1 1/2″ Wilden M4 or P4 Pumps
- Manufacturer: Wilden
Muffler for 1 1/2″ Wilden M4 or P4 Pumps ***All Air Parts are Non-Returnable***
Pickering, Canada
Trusted Seller
Tool Milling Machine TOS FNGJ 40, YOM: 1999. Stock machine (Toronto, Canada). Available immediately
- Manufacturer: Intos
- Model: FNGJ 40
Technical specification: TOS FNGJ 40 Working table surface in | mm 31.5 x 15.7 | 800 x 400 Travel X-axis in | mm13.4 | 600 Travel Y-axis in | mm15.7 | 400 Travel Z-axis in | mm15.7 | 400 Spindle taper ...
$14,631 USD
Get financing
Est. $287/mo
Toronto, Canada
10 foot manual Hand Beak Brown Boggs
- Manufacturer: Brown Boggs
Good working 10 foot manual sheet metal break $3800
$2,798 USD
Toronto, Canada
WEG, 15 Hp, 254TC, C-Face 1,750 Rpm. 600V 3Ph. TEFC
- Manufacturer: WEG
Weg 15Hp 575-600V 3 Phase, 60Hz, 15Hp, 1,760 Rpm. Inverter Duty, 1.15 Service factor, Foot and C-Face mounting W-6, 1 5/8” dia. Keyed shaft NMEA IP55, TEFC Reconditioned New Bearings. 2 Available $750 each.
$552 USD
Toronto, Canada
Mitsui Seiki Vertex 550-5X Machining Center
- Manufacturer: Mitsui Seiki
- Model: Vertex 550-5X
Good condition Mitsui Seiki Vertex 550-5X Machining Centers available between 2008 and 2018 years. Located in Canada and other countries. Click request price for more information.
Canada