Used Granulators & Pelletizers

CUMBERLAND 484 GRANULATOR 18173

• Manufacturer: Cumberland

Cumberland model 484 granulator. S/N 421000-91024. 14″ x 16″ feed throat. 3 knife slant cut open rotor, 2 bed knife. 15 HP 460-volt motor. Insulated tray feed hopper and body panels. 6″ OD airveyor discharge. On ...

CUMBERLAND 810 GRANULATOR 17762

• Manufacturer: Cumberland

Cumberland model 810 granulator, 8″ x 10″ feed throat, 2 knife solid rotor, 2 bed knife, 5 HP 230/460-volt motor, tray feed hopper, bin with 2″ OD rear vacuum take off discharge, 1/4″ holes screen, mounted on cas...

CUMBERLAND 1420 GRANULATOR 16023

• Manufacturer: Cumberland

Cumberland model 1420 granulator. S/N none. 14″ x 20″ feed throat, 3 knife rotor, 2 bed knife. Approximately 20HP motor. No in-feed hopper barrel base discharge with 3/8″ clearance and 26.75″ wide x 24″ deep barr...

CUMBERLAND 1220 GRANULATOR 17979

• Manufacturer: Cumberland

Cumberland model 1220 granulator. S/N 293400-00503. 12″ x 20″ feed throat. 3 knife open rotor, 2 bed knife. 15 HP 230/460-volt motor. Insulated tray feed hopper and body panels. 4″ OD left hand airveyor discharge...

CUMBERLAND 1842i GRANULATOR 16016

• Manufacturer: Cumberland

Used Cumberland model 1842i granulator, S/N CG0170-99504, 18″ x 42″ feed throat, new 3 knife twin shear/high shear open rotor, 2 bed bed knife, 75HP 460V motor, insulated tray feed hopper and body panels, 8″ left...

CUMBERLAND 584 GRANULATOR 16508

• Manufacturer: Cumberland

Cumberland model 584 granulator. S/N 335000-90001. 14″ x 20″ feed throat, 3 knife slant cut open rotor, 2 bed knife, 30HP 230/460V motor. Insulated tray feed hopper with 8″ ID left hand pipe chute gravity dischar...

SEM 23 GRANULATOR 18754

SEM model 23 (Nelmor G1224M1) granulator. S/N 04C05784. 12″ x 24″ feed throat. 5 knife solid rotor with 2 bed knives. 40 HP 460-volt motor. Double wall insulated tray feed hopper with manual jack back assist. 5″ ...

CUMBERLAND 284 GRANULATOR WITH FEED 17151

• Manufacturer: Cumberland

Cumberland model 284 granulator. S/N 325525-7717. 10″ x 12″ feed throat 3 knife open slant cut rotor. Two (2) bed knives. 10HP 230/460V motor. Insulated tray feed hopper with rear mounted 8″ wide x 2.5″ OD knurle...

SCHEER BAY SGS-50E PELLETIZER 18133

• Manufacturer: Scheer

One (1) used Scheer Model SGS-50-E strand pelletizer. S/N SE5-0707. Nominal 2″ wide entrance. Has 20 knife carbide inlay helical style rotor driven by an A/C motor with Reliance variable speed controller. Mounted...

GALA 5MUP UNDERWATER PELLETIZING SYSTEM 17908

One (1) used Gala model 5MUP underwater pelletizing system. Includes 2 HP cutter with four (4) blade hub, three (3) spare dies, 40 GPM TWS-40 water system with heater, pump, heater exchanger, 5 HP model 8.2 BF dr...

RAPID GK50 GRANULATOR 2348

Rapid model GK50 granulator, S/N 2171. 9″ x 12″ feed throat, 4 knife fly open rotor, 2 bed knife cutting chamber, 5HP motor, 2″ OD vacuum take-off bin, complete with starter. Manufactured in 1973.Five machines ar...

CUMBERLAND 1524B GRANULATOR 5823

• Manufacturer: Cumberland

Cumberland model 1524B granulator. S/N none. 15″ x 24″ feed throat, 3 knife radial rotor, 2 bed knife, 50HP 230/460V motor. 54″ tall gaylord base, discharge tray feed hopper. Starter and controls are not included...

CUMBERLAND 1828B GRANULATOR 10875

• Manufacturer: Cumberland

Cumberland model 1828B granulator. S/N 49410-779. 18″ x 28″ feed throat, 3 knife steep angle rotor, 2 bed knife. 75HP 460V motor tray feed hopper, 8″ airveyor discharge mounted on a leg base. Starter and controls...

CUMBERLAND 1837B GRANULATOR 17054

• Manufacturer: Cumberland

Cumberland model 1837B granulator. S/N 50510-7718. 18″ x 37″ feed throat, 5 knife steep angle rotor, 2 bed knife, 100HP 230/460V motor. Conveyor feed hopper, 8″ airveyor discharge mounted on a step base. Starter ...

Vaner V-C20 Granulators & Pelletizer

• Manufacturer: Vaner
• Model: V-C20

Good condition Vaner V-C20 Granulators & Pelletizers. Located in USA and other countries. Click request price for more information.