Used Evaporators

Wiped/Thin Film Evaporator 195 kg/h (430 lb/h) Stainless Steel 316 - IPP# 87894

• Manufacturer: Luwa SMS

(3) evaporator sections Separator section 48" dia. Int rated full vac, jkt rated 150 psi @ 393 deg F. Cone btm not jkt. 4-blade rotor. Belt driven by 15 HP, 3/60/220/440 volt, 1140 rpm motor, UL label. Rotor 380 ...

Zymark TurboVap 96 Concentration Evaporator Workstation

• Manufacturer: Zymark

The Zymark TurboVap 96 Concentration Evaporator Workstation, Part #71000/1, is a microprocessor-controlled evaporation system for simultaneous, automated concentration of multiple samples with unattended operatio...

Biotage TurboVap 96 Concentration Evaporator Workstation

• Manufacturer: Biotage

The TurboVap 96 Concentration Evaporator Workstation is a microprocessor-controlled evaporation system for simultaneous, automated concentration of multiple samples with unattended operation, convenience and spee...

Stainless Steel 316 Luwa SMS HS0050 Wiped/Thin Film Evaporator - IPP# 102561

• Manufacturer: Luwa

jkt rated 16 kg/sq cm @ 200 deg C. 9 gal capacity W/(2) rows of str blades and (2) rows of positive pitched blades @ 25 deg angle on central core. Driven by 20 HP, 1170 rpm Reeves variable speed drive, 6.2:1 rati...

Wiped/Thin Film Evaporator 626 kg/h (1,400 lb/h) Stainless Steel 304 - IPP# 31726

• Manufacturer: Buflovak/Blaw Knox

304 ELC SS 40% clad on Carbon steel (for product contact), thin film evaporator system 165 psi @ 400 deg F jkt NB stamped 5932. Rotor was under driven by 20 HP, 3/60/220/440 volt mtr w/UL label, 480 rpm rotor spe...

Stainless Steel 316L Luwa SMS HM-1200 Wiped/Thin Film Evaporator - IPP# 706885

• Manufacturer: Luwa

jacketed thin ‘filmtruder’ evaporator system, internal pressure -1/3.2 bar @ 200 degrees C (3900 liter), top jacket 7 bar @ 200 degrees C (11 liter), straight side jackets 7 bar @ 200 degrees C (3 x 65 liter), bo...

Rising/Falling Film Evaporator 12 kg/h (26.5 lb/h) Stainless Steel Austenitic - IPP# 220572

• Manufacturer: Kleiser Gmbh

1.4571/HII falling film evaporator carbon steel shell internal; -1/9 bar @ 250 ° C jacket, internal 1291 l, jacket 1.020 l

Stainless Steel 304 Pfaudler 103.4-36V-274 Wiped/Thin Film Evaporator - IPP# 246862

• Manufacturer: Pfaudler

Additional Info:

Wiped/Thin Film Evaporator 72.6 kg/h (160 lb/h) Stainless Steel 316 - IPP# 100417

• Manufacturer: Leybold-Heraeus

RECONDITIONED, 20-300 Kg/sq m/hr shortpath evaporator. System working pressure 20x10-1x10 mbar. System consists of (1) Leybold KD300, 32.2 sq ft (3 sq meter) 316SS vert wiped film evaporator, SN 1982/1. W/53.8 (5...

Wiped/Thin Film Evaporator 181.4 kg/h (400 lb/h) Stainless Steel 316 - IPP# 49898

• Manufacturer: Artisan

Kontro wiped film evaporator shell rated 25 psi @ 750 deg F. Jacket rated 65 psi @ 750 degree F. Has removable 18" diameter rotor. Mechanical seal. Has 1/2 CS jacket with expansion joint. Has outboard bearings. H...

Wiped/Thin Film Evaporator 47.6 kg/h (105 lb/h) Stainless Steel 316 - IPP# 219255

• Manufacturer: Buss-SMS-Canzler GmbH

wiped film evaporator with carbon steel jacket jackets 10 bar @ 185 deg C, carbon steel jackets on straight side rotor speed 210 rpm, wiper blades with teflon lining, double mech seal on shaft heated length 2120m...

Rising/Falling Film Evaporator 6,700 kg/h (14,750 lb/h) Stainless Steel Austenitic - IPP# 706887

• Manufacturer: Kleiser Gmbh

single effect vertical falling film evaporator jacket -1/6 bar @ 200 degrees C (1100 liter), 6.7 m3/hour evaporation rate Fabrik #3981 single pass tubeside, 316Ti (1.4571) stainless steel tubesheets, 800mm diamet...

Wiped/Thin Film Evaporator 113.4 kg/h (250 lb/h) Stainless Steel 304 - IPP# 12259

260 gal 50 sq ft Dupont 316SS short path wiped film evaporator Body jkt top head is a flanged dish head of Carpenter 20, btm head is flanged and dish unjkt, 316SS Rotor and wiper entrainment section is made of 31...

Wiped/Thin Film Evaporator 108.9 kg/h (240 lb/h) Stainless Steel Austenitic - IPP# 219924

• Manufacturer: Luwa-SMS

jacketed conical wiped film evaporator, capacity volume 1.480 liter, (2) jackets rated 20 bar @ 250 degrees C, capacity volume 11 liter and 53 liter rotor direct driven by a 15 kW electrical motor, manufactured b...

Wiped/Thin Film Evaporator 204.1 kg/h (450 lb/h) Stainless Steel Austenitic - IPP# 215314

• Manufacturer: Luwa SMS

wiped film evaporator/crystalliser 6650 ltr, jacket 6 bar @ 100 deg C, 1890 ltr, 1.4571 s/steel wetted parts, 323.9mm ID x 8450mm long x 7mm thick chamber c/steel jacket 368mm diameter x 8410mm long x 4mm thick w...