Food & Beverage Processing » Brewing Equipment » Tanks » Oregon

Building Filters

114

Used Tanks in Oregon, USA

  • Trusted Seller
    Used Pub Brewing 25 bbl

    Used Pub Brewing 25 bbl / 750 Gal Single wall 14.7psi storage/brite tank

    • Manufacturer: Pub Brewing Co

    One Available - Used Pub Brewing Co. 25 BBL (775 Gallon) stainless Brite tank, approximately 4' diameter x 6' straight side with dish bottom and center bottom discharge, mounted on 20" legs. Includes dish top, 14...

    Portland, OR
  • Trusted Seller
    Ager Tank & Equipment 48"

    Ager Tank & Equipment 48" Accumulation Disk

    • Manufacturer: Ager Tank and Equipment Co.

    Item is a used, 48 inch diameter al stainless steel variable speed accumulation disk. The machine is equipped with a single guide rail. Power requirement is 120 volt single phase.

    Portland, OR
  • Trusted Seller
    Used 10 bbl Mash Tun/

    Used 10 bbl Mash Tun/ Steeping Tank

    • Manufacturer: Agile Stainless

    (1) Available - Item is a used Agile Stainless 10 bbl insulated mash tun. The tank was built new in Portland, Oregon in 2022 at a cost of over $50,000!. It is designed as follows: 10 bbl Mash tun / steeping tank...

    Portland, OR
  • Trusted Seller
    S/S 300 Gallon tank

    S/S 300 Gallon tank

      Item is a used, S/S, single wall, open top, 300 gal. (approx.) mix tank. The tank dimensions are 40" diameter X 54" straight side. Tank has a 2" side/bottom outlet and is equipped with fork pockets. It has a clam...

      Portland, OR
    • Trusted Seller
      Used JVNW 40 / 1230

      Used JVNW 40 / 1230 Gal Jacketed High Pressure Brite Tank

      • Manufacturer: JV Northwest

      (1) Available - Item is a used JV Northwest 40 bbl / 1230 Gal jacketed brite tank / storage tank. This is an asme board certified vessel that was built new in 2015 and used in a beverage facility for carbonating ...

      Portland, OR
    • Trusted Seller
      (1) Available - Used Speidel

      (1) Available - Used Speidel 1000L / 265 Gallon open top mix tank

      • Manufacturer: Speidel

      (1) Available - Item is a used Speidel 1000L / 265 gallon open top mix tank. This is a dish bottom tank with open top, 1.5" tri clamp discharge with valve, and 1.5" tri clamp fitting in the sidewall. The tank is ...

      Portland, OR
    • Trusted Seller
      (1) available - Used 7bbl

      (1) available - Used 7bbl / 217 Gal Glacier Tank jacketed brite tank

      • Manufacturer: Glacier Tanks

      (1) available - Item is a used Glacier Tank 7BBL jacketed brite beer tank - This tank is set up with a side manway door, CIP, PRV, carbstone, sample valve, pressure gauge, dual zone jackets on the sidewall and th...

      Portland, OR
    • Trusted Seller
      (1) Avalable - Used Marks

      (1) Avalable - Used Marks Fabrication 120 bbl/ 3720 Gal glycol jacketed cold liquor (water) tank

      • Manufacturer: Marks

      (1) available - Used Marks Fabrication 120bbl / 3720 Gal glycol jacketed and stainless clad cold liquor/water tank. This tank was used in a brewery and is represented in great shape. This tank includes a 3hp wash...

      Portland, OR
    • Trusted Seller
      (1) Available - Used Letina

      (1) Available - Used Letina 320L/ 85 Gal open top tank with wheels

      • Manufacturer: Letina Inox

      (1) available - Used Letina 320L open top tank with wheels. The tank is fitted with a variable capacity lid and valves. The machine was last used in a beverage facility and is represneted in good shape.

      Portland, OR
    • Trusted Seller
      (1) Used 1000 gallon (approx)

      (1) Used 1000 gallon (approx) stainless steel mix tank

        (1) available - Item is a used 1000 gallon single wall stainless steel mix tank. The tank has a sloped bottom with triclamp discharge valve and a side mounted prop style a mixer with drive. The top of the tank ha...

        Portland, OR
      • Trusted Seller
        (1) Available - Used IDD

        (1) Available - Used IDD 50 bbl / 60hl (1550 Gal) jacketed brite tank

        • Manufacturer: IDD

        (1) available - Used IDD 50bbl / 60HL 1550 gal dome top dish bottom jacketed brite tank with side manway, 4 legs with cross bracing, CIP, PRV, sample valve, carb stone, and dual cooling zones. Dimesnions are appr...

        Portland, OR
      • Trusted Seller
        NEW STOCK BSV 10 BBL

        NEW STOCK BSV 10 BBL SINGLE WALL TANK

        • Manufacturer: BSV Tanks

        New stock - these are 10 bbl single wall storage/serving tanks. These are dometop/dish bottom and designed to hold 15psi. They have side manway doors and include CIP, PRV, Sample valve, carb stone, and butterfly ...

        Portland, OR
      • Trusted Seller
        Letina 530 gallon mix tank

        Letina 530 gallon mix tank

          New Stock - Letina Inox single wall vertical mix tank with top mount mixer and wheels for mobility. - volume ca. 2000 lit - coat diameter 1275 mm, height 1550 mm - total height ca. 2100 mm - wheels height 250 mm ...

          Portland, OR
        • Trusted Seller
          NEW STOCK BSV 20 BBL

          NEW STOCK BSV 20 BBL JACKETED BRITE TANK

          • Manufacturer: BSV Tanks

          BSV 20 Bbl Jacketed Brite tank - 304 stainless steel construction, welded exterior, 2-zone jackets (sidewall and bottom dish), insulated and stainless steel clad, dome top, dish bottom, 15 psi operating pressure ...

          Portland, OR
        • Trusted Seller
          New Stock Letina 20hl Brite

          New Stock Letina 20hl Brite Tank

            Item is a new stock Letina 20hl jacketed bbt. The tank is designed as follows: - brite beer tank - volume approx. 2450 lit - useful volume 2000 lit - coat diameter 1275 mm, height 1700 mm - insulator diameter 139...

            Portland, OR
          12345

          Overview

          Brewing tanks are stainless-steel vessels used for fermentation, conditioning, storage, and bright beer handling in breweries. They come in shapes like conical, cylindroconical, and horizontal, with capacities from pilot scales to large production sizes. Common features include manways, racking arms, CIP spray balls, temperature-control jackets, and pressure ratings. Buyers focus on sanitary design, material grade, fittings, instrumentation, and insulation to match production and cleaning requirements.

          FAQ

          What should I check when buying a used brewing tank?

          Verify material grade (304 vs 316), internal surface finish, weld quality, presence of pitting or dents, condition of manways, gaskets, valves and fittings, insulation and jacket condition, pressure rating, and available documentation or maintenance records.

          How do I arrange safe shipping for a brewing tank?

          Measure overall dimensions, weight, and center of gravity. Remove fragile fittings, secure doors and manways, crate or skid the tank, protect polished surfaces, and hire riggers and an experienced transport carrier. Check for oversize permits and lifting requirements at origin and destination.

          Does a used brewing tank need recertification or pressure testing?

          If the tank is a pressurized vessel, local codes often require certification and periodic pressure tests (hydrostatic). Even non-pressurized tanks should be inspected for structural and sanitary integrity; request previous test certificates or plan fresh inspection before use.

          What routine maintenance keeps a brewing tank in good condition?

          Perform regular CIP cycles, inspect and replace worn gaskets and seals, check fittings and welds for corrosion, passivate stainless surfaces if needed, maintain jacket and thermometer/thermostat components, and schedule deep sanitary cleanings between batches.