Used Block, Brick & Paver Making Machines in France

Tile set 20 cartons

Technical characteristics: manual loading mandatory brand AGROB BUCHTAL - Germany dimension 240 x 100 x 8mm - 33 pieces per perforated carton that is 0.80 m² per carton approximately X 20 cartons that is abo...

Molds for block presses

Moulds for block presses Block and Hourdis molds for various machines Please specify your request.

Various molds for block presses

Moulds for block presses Block and Hourdis molds for various machines Please specify your request.

Concrete block rectification line

For Concrete Blocks Complete concrete block grinding unit (top/bottom) Accuracy = 0.3 mm in height This calibration minimizes horizontal joints and eliminates "ghost joints" (where the blocks are simply glued tog...

Concrete block rectification line

For Concrete Blocks 2 Grinding Machines 2 Conveyor Sets 1 Depalletizing Clamp 1 Transfer and Turning Clamp 1 Repalletizing Clamp 1 Wrapping Machine

Testing laboratory for concrete blocks

Presse d'écrasement pour Blocs et Eprouvettes Béton Matériel de marque 3R Presse d'écrasement + pupitre Quantris Possibilité d'écraser les blocs de 37 cm de large !! + Bac chauffant pour le souffre FICHE-DE-MISE-...

Robol Concrete Block Palletizing System

KUKA 500-570 Palletizing Robot Palletizing robot for blocks Brand: KUKA Model: 500-570 Training console included Very good condition Minimum price

Moulds for 5-block press

20 Block and Hourdis moulds for 5-block presses Small adaptatatioh to fit on all 5 blocks presses Here are moulds for MMH6 Brouiller press And there is the whole range of blocks and Hourdis in 20 and 25 cm high S...

20 Moulds for 5-block press

• Manufacturer: Quadra

20 used moulds for blocks, slabs and paving stones for 6-block presses Small adaptation possible to fit on all 6 blocks presses Here, they are moulds for Quadra Q6 press

Machine for Ø1000 manhole covers

Ø1000 / Ø300-400-500 et Ø600 (angle variable) Machine marque BFS Machine destinée à produire des Fonds de Regards Ø1000 (Cunettes) Entrées = Ø300,400,500,600 (angles variables suivant liste en fichier joint "Docu...

COLLE 30-120 Pipe Machine

With Moulds Brand COLLE Type Vibromatic Ø300 - Ø1200 107 KW / Tri + N / 4*250A Equipped with Moulds, Pestle, Base rings, Covers Average cycle = 6' / 7h00 / shift 3*Ø300 --> 210 u = 525 ml / 75 washers available 3...

COLLE 30-120 Pipe Machine

With Moulds Brand COLLE Type Vibromatic Ø300 - Ø1200 107 KW / Tri + N / 4*250A Equipped with Moulds, Pestle, Base rings, Covers Average cycle = 6' / 7h00 / shift 3*Ø300 --> 210 u = 525 ml / 75 washers available 3...

Machine for Ø1000 manhole covers

Ø1000 / Ø300-400-500 et Ø600 (angle variable) Machine marque BFS Machine destinée à produire des Fonds de Regards Ø1000 (Cunettes) Entrées = Ø300,400,500,600 (angles variables suivant liste en fichier joint "Doc...

Nozzle machine Ø200 to Ø600

Nozzle machine Ø200 to Ø600 / Equipped in Ø200,400,500 and Ø600 Small machine for nozzle production / length 1 meter Half-thickness gaskets Equipped in Ø200,400,500 and Ø600 except Ø300 The Ø300 is produced on an...

Immediate demoulding Slabs

Turning System Turning and immediate demoulding machine ATELIER DU LOIR Condition Ok / rewiring to be correctly installed Molds and trays 3.20m x 0.80m x 65 mm 14 levels / pitch = 230 mm / 10 trays per level