Building Filters
- Trusted Seller
Yield Engineering YES-15F HMDS Oven
- Manufacturer: Yield Engineering
- Model: YES-15
YIELD ENGINEERING YES 15 HMDS VAPOR PRIME OVEN consisting of:- Model: YES-15F- Up to 200 Degrees Celsius - Chamber Dimensions 16” x 16” x 16” with fixed shelf- 8 Heaters (200 Watt Each)- Temperature Controller- H...
Decatur, GA - Trusted Seller
Yield Engineering YES 18P Image Reversal Oven
- Manufacturer: Yield Engineering
- Model: YES
YIELD ENGINEERING YES 18P IMAGE REVERSAL OVEN consisting of:- Model: YES-18P - Lark Sequencer - Granville Phillips 275 Convectron Gauge - West 2050 Temp Controller - SN: 87785
Decatur, GA - Trusted Seller
Yield Engineering YES-15F HMDS Vapor Prime Oven
- Manufacturer: Yield Engineering
- Model: YES-15
YIELD ENGINEERING YES 15 HMDS VAPOR PRIME OVEN consisting of:- Model: YES-15F- Up to 200 Degrees Celsius - Chamber Dimensions 16” x 16” x 16” with fixed shelf- 1700W Heaters- Temperature Controller- HMDS Cylinder...
Decatur, GA - Trusted Seller
Yield Engineering YES 15 HMDS Vapor Prime Oven
- Manufacturer: Yield Engineering
- Model: YES-15
YIELD ENGINEERING YES 15 HMDS VAPOR PRIME OVEN consisting of:- Model: YES-15- Chamber Dimensions 16” x 16” x 16” with fixed shelf- 1700W Heaters- Temperature Controller- HMDS Cylinder- Logical Sequencer- Granvill...
Decatur, GA - Trusted Seller
Yield Engineering YES-450PB6-2 Polyimide Bake Oven
- Manufacturer: Yield Engineering
- Model: YES-450
YIELD ENGINEERING YES-450PB POLYIMIDE BAKE OVEN consisting of:- Model: YES-450PB6-2- Max Capacity: 2 cassettes of 6" Wafers - Temperature Range: 25 - 450 degrees C - Vacuum Pump not included - Power: 220V,30 Am...
Decatur, GA - Trusted Seller
Yield Engineering YES-5TA HMDS Vapor Prime Oven
- Manufacturer: Yield Engineering
- Model: YES-5
YES-5TA HMDS Vapor Prime Oven consisting of:- Model: YES-5TA- SN: 89066- As-Is Condition
Decatur, GA - Trusted Seller
Yield Engineering YES LPIII-M3 HMDS Vapor Prime Oven
- Manufacturer: Yield Engineering
- Model: YES-3
YIELD ENGINEERING YES LPIII-M3 HMDS VAPOR PRIME OVEN consisting of:- Model: YES LPIII-M3 - HMDS Vapor Prime and Vacuum Bake Oven - Chamber Dimensions Approximately 12" x 12" x 12"- No Shelf- 6 Heater- Temperature...
Decatur, GA - Trusted Seller
YES 450 PB6
- Manufacturer: Yield Engineering
- Model: YES-450
Yield Engineering Systems YES 450 PB6 Capacity 2 Cassettes of up to 6″ wafers Temperature Range Ambient to 450’C Interior Chamber Dimensions 10.75 (Barrel) x 7.5″H x 16″D
Billerica, MA - Trusted Seller
YES LP-III
- Manufacturer: Yield Engineering
- Model: YES
YIELD ENGINEERING YES LP-lll Vapor Prime Oven ID 12 x 12 x 13″ Deep Much easier to program than old OEM controllers Ready to ship ONE YEAR WARRANTY ON ELECTRONICS
Billerica, MA - Trusted Seller
Yield Engineering YES-450PB6 Polyimide Bake Oven
- Manufacturer: Yield Engineering
- Model: YES-450
150mm Refurbished
United States - Trusted Seller
Yield Engineering YES-6A Bake/Vapor Prime Oven
- Manufacturer: Yield Engineering
- Model: YES
This Yield Engineering Systems YES-6A Vacuum Bake/ Vapor Prime Oven looks to be in good cosmetic condition with signs of wear and previous use. It's missing the interrupt cover, but powers up as shown and I coul...
United States 
Yield Engineering YES-58SM
- Manufacturer: Yield Engineering
- Model: YES-58
Tested, partially working. Oven heats to set point. Oven AC cord outer insulation is cracking off, inner wire insulation is in good condition still. The side unit/box never powers on. There is tape holding the si...
$784 USDRancho Cordova, CA
YES READRITE OVEN YIELD ENGINEERING SYSTEM
- Manufacturer: Yield Engineering
- Model: YES
INFORMATION YES YIELD ENGINEERING SYSTEM INC. MODEL YES READRITE System was de-installed in working operational condition. All returns must comply with stated Return Policy. Please continue: PAYMENT OPTIONS: We a...
Santa Barbara, CA
Yield Engineering YES-450 PB6-8P Polyimide Bake Oven
- Manufacturer: Yield Engineering
- Model: YES-450
Polyimide vacuum bake oven with vacuum pump. Features: High temperature, air cooled, laminar flow oven Operates at temperatures up to 450°C Designated for 8 cassettes of up to 6 in. wafers Front panel PLC control...
San Jose, CA
2015 Yield Engineering 450 PB12-2P-CP Polyimide bake oven for maximum 300mm wafers
- Manufacturer: Yield Engineering
- Model: YES-450
sn 89416 EXCEPTIONAL CONDITION FROM LOCAL IBM ALMADEN RESEARCH LAB Manufacture date 2015 Cooling fan 2000 scfm included Vacuum pump Edwards nXDS35i scroll pump REBUILT WITH NEW TIP SEALS included (or Sogevac ...
San Jose, CA
Yield Engineering YES Surface Treatment / Cleaning
- Manufacturer: Yield Engineering
- Model: YES
Good condition Yield Engineering YES Surface Treatment / Cleanings manufactured in 2010. Located in USA and other countries. Click request price for more information.
USA
