Building Filters

Used Yield Engineering YES Surface Treatment / Cleaning

Trusted Seller
Yield Engineering YES-15F HMDS Oven
- Manufacturer: Yield Engineering
- Model: YES-15
YIELD ENGINEERING YES 15 HMDS VAPOR PRIME OVEN consisting of:- Model: YES-15F- Up to 200 Degrees Celsius - Chamber Dimensions 16” x 16” x 16” with fixed shelf- 8 Heaters (200 Watt Each)- Temperature Controller- H...
Decatur, GA
Trusted Seller
Yield Engineering YES 18P Image Reversal Oven
- Manufacturer: Yield Engineering
- Model: YES
YIELD ENGINEERING YES 18P IMAGE REVERSAL OVEN consisting of:- Model: YES-18P - Lark Sequencer - Granville Phillips 275 Convectron Gauge - West 2050 Temp Controller - SN: 87785
Decatur, GA
Trusted Seller
Yield Engineering YES-450PB6-2 Polyimide Bake Oven
- Manufacturer: Yield Engineering
- Model: YES-450
YIELD ENGINEERING YES-450PB POLYIMIDE BAKE OVEN consisting of:- Model: YES-450PB6-2- Max Capacity: 2 cassettes of 6" Wafers - Temperature Range: 25 - 450 degrees C - Vacuum Pump not included - Power: 220V,30 Am...
Decatur, GA
Trusted Seller
Yield Engineering YES-15F HMDS Vapor Prime Oven
- Manufacturer: Yield Engineering
- Model: YES-15
YIELD ENGINEERING YES 15 HMDS VAPOR PRIME OVEN consisting of:- Model: YES-15F- Up to 200 Degrees Celsius - Chamber Dimensions 16” x 16” x 16” with fixed shelf- 1700W Heaters- Temperature Controller- HMDS Cylinder...
Decatur, GA
Trusted Seller
Yield Engineering YES 15 HMDS Vapor Prime Oven
- Manufacturer: Yield Engineering
- Model: YES-15
YIELD ENGINEERING YES 15 HMDS VAPOR PRIME OVEN consisting of:- Model: YES-15- Chamber Dimensions 16” x 16” x 16” with fixed shelf- 1700W Heaters- Temperature Controller- HMDS Cylinder- Logical Sequencer- Granvill...
Decatur, GA
Trusted Seller
Yield Engineering YES 58 HMDS Vapor Prime Oven
- Manufacturer: Yield Engineering
- Model: YES-58
YIELD ENGINEERING YES 58 HMDS VAPOR PRIME OVEN consisting of:- Model: YES 58- Dual Function (Prime / Reversal)- Up to 200 Degrees Celsius - Chamber Dimensions 16” x 16” x 16”- One Shelf - 1700W Heater- Temperatur...
Decatur, GA
Trusted Seller
Yield Engineering YES-5TA HMDS Vapor Prime Oven
- Manufacturer: Yield Engineering
- Model: YES-5
YES-5TA HMDS Vapor Prime Oven consisting of:- Model: YES-5TA- SN: 89066- As-Is Condition
Decatur, GA
Trusted Seller
Yield Engineering YES LPIII-M3 HMDS Vapor Prime Oven
- Manufacturer: Yield Engineering
- Model: YES-3
YIELD ENGINEERING YES LPIII-M3 HMDS VAPOR PRIME OVEN consisting of:- Model: YES LPIII-M3 - HMDS Vapor Prime and Vacuum Bake Oven - Chamber Dimensions Approximately 12" x 12" x 12"- No Shelf- 6 Heater- Temperature...
Decatur, GA
Trusted Seller
YES 450 PB6
- Manufacturer: Yield Engineering
- Model: YES-450
Yield Engineering Systems YES 450 PB6 Capacity 2 Cassettes of up to 6″ wafers Temperature Range Ambient to 450’C Interior Chamber Dimensions 10.75 (Barrel) x 7.5″H x 16″D
Billerica, MA
Trusted Seller
YES LP-III
- Manufacturer: Yield Engineering
- Model: YES
YIELD ENGINEERING YES LP-lll Vapor Prime Oven ID 12 x 12 x 13″ Deep Much easier to program than old OEM controllers Ready to ship ONE YEAR WARRANTY ON ELECTRONICS
Billerica, MA
Trusted Seller
Yield Engineering YES-450PB6 Polyimide Bake Oven
- Manufacturer: Yield Engineering
- Model: YES-450
150mm Refurbished
United States
Trusted Seller
Yield Engineering YES-6A Bake/Vapor Prime Oven
- Manufacturer: Yield Engineering
- Model: YES
This Yield Engineering Systems YES-6A Vacuum Bake/ Vapor Prime Oven looks to be in good cosmetic condition with signs of wear and previous use. It's missing the interrupt cover, but powers up as shown and I coul...
United States
Yield Engineering YES-58SM
- Manufacturer: Yield Engineering
- Model: YES-58
Tested, partially working. Oven heats to set point. Oven AC cord outer insulation is cracking off, inner wire insulation is in good condition still. The side unit/box never powers on. There is tape holding the si...
$871 USD
Rancho Cordova, CA
YES READRITE OVEN YIELD ENGINEERING SYSTEM
- Manufacturer: Yield Engineering
- Model: YES
INFORMATION YES YIELD ENGINEERING SYSTEM INC. MODEL YES READRITE System was de-installed in working operational condition. All returns must comply with stated Return Policy. Please continue: PAYMENT OPTIONS: We a...
Santa Barbara, CA
Yield Engineering YES-450 PB6-8P Polyimide Bake Oven
- Manufacturer: Yield Engineering
- Model: YES-450
Polyimide vacuum bake oven with vacuum pump. Features: High temperature, air cooled, laminar flow oven Operates at temperatures up to 450°C Designated for 8 cassettes of up to 6 in. wafers Front panel PLC control...
San Jose, CA
Yield Engineering YES Surface Treatment / Cleaning
- Manufacturer: Yield Engineering
- Model: YES
Good condition Yield Engineering YES Surface Treatment / Cleanings manufactured in 2010. Located in USA and other countries. Click request price for more information.
USA