Building Filters
Yield Engineering YES-58SM
- Manufacturer: Yield Engineering
- Model: YES-58
Tested, partially working. Oven heats to set point. Oven AC cord outer insulation is cracking off, inner wire insulation is in good condition still. The side unit/box never powers on. There is tape holding the si...
$871 USDRancho Cordova, CAYES READRITE OVEN YIELD ENGINEERING SYSTEM
- Manufacturer: Yield Engineering
- Model: YES
INFORMATION YES YIELD ENGINEERING SYSTEM INC. MODEL YES READRITE System was de-installed in working operational condition. All returns must comply with stated Return Policy. Please continue: PAYMENT OPTIONS: We a...
Santa Barbara, CAYield Engineering LPIII-M3 Vapor Primer Oven
- Manufacturer: Yield Engineering
Features: HMDS Flask included Specifications: 115VAC 10.5 Amps 60Hz
San Jose, CAYield Engineering YES R-3 Plasma Cleaning System
- Manufacturer: Yield Engineering
- Model: R3
Features: Capacitive downstream reactor Multi-program microprocessor controller 2 gas inputs Specifications: Total plasma uniformity across planar 12. in. x 12 in.
San Jose, CAYield Engineering YES-450 PB6-8P Polyimide Bake Oven
- Manufacturer: Yield Engineering
- Model: YES-450
Polyimide vacuum bake oven with vacuum pump. Features: High temperature, air cooled, laminar flow oven Operates at temperatures up to 450°C Designated for 8 cassettes of up to 6 in. wafers Front panel PLC control...
San Jose, CAYield Engineering (YES) model 3TA HMDS vapor prime oven
- Manufacturer: Yield Engineering
Interior chamber: 12"w x 13.25"d x 12"h (2) PID Temperature Controllers 25-200ºC PLD Logic Controller with Touchscreen Display Granville-Phillips Digital Vacuum Gauge Side Mounted, High-Capacity Syphon-Fill ...
$24,500 USDSan Jose, CAYield Engineering YES-FPO - Dual Function (Vacuum bake/Vapor Prime - Image Reversal)
- Manufacturer: Yield Engineering
- Model: YES
Specifications: The FPO vacuum bake/vapor prime process, you can significantly extend time available between process steps. Plus, chemical usage for a vapor deposition process is typically less than 1% of the amo...
San Jose, CAYield Engineering R3 Plasma Cleaner with 500w power supply @ 50Khz
- Manufacturer: Yield Engineering
- Model: R3
Plasma cleaner for hybrid devices microprocessor control with multi program capability down stream design for better uniformity 2 pull out shelves each 12.75"x12.75" three gas inputs each with needle valve fl...
$14,900 USDSan Jose, CA2015 Yield Engineering 450 PB12-2P-CP Polyimide bake oven for maximum 300mm wafers
- Manufacturer: Yield Engineering
- Model: YES-450
sn 89416 EXCEPTIONAL CONDITION FROM LOCAL IBM ALMADEN RESEARCH LAB Manufacture date 2015 Cooling fan 2000 scfm included Vacuum pump Edwards nXDS35i scroll pump REBUILT WITH NEW TIP SEALS included (or Sogevac ...
San Jose, CAGlen Technologies (Yield Engineering) R3A 500W low frequency Plasma Asher
- Manufacturer: Yield Engineering
- Model: R3
PLC controlled and offers real-time plain English readout of system operating parameters together with remedial action in the event of an abort. Active Plasma for routine cleaning of sample surfaces RIE Plasma ...
$12,900 USDSan Jose, CAYield Engineering 450PB6-2P REFURBISHED High temperature vacuum oven for polyimide, photoresist and epoxy curing (2014)
- Manufacturer: Yield Engineering
- Max Capacity: 2 cassettes of 150mm Wafers - Temperature Range: 25C to 450C - Multiple Program Temperature Controller - Power: 220V, 25 Amps, 50/60 Hz 3 phase +1G-Exhaust fan included _Leybold Sogevac SV40 ...
$49,500 USDSan Jose, CA2022 Yield Engineering Systems YES 450 PB8-2P-CP Polyimide Bake Oven with Oxygen Monitor and 3 MFC Gas inputs
- Manufacturer: Yield Engineering
- Model: YES-PB8
YES -PB8-2P-CP Interior chamber dims: 14.42"ID x 26.19"deep Wafer Capacity: up to 50 200mm wafers/batch (2 25 wafer cassettes) 100 micron inlet for preheated N2 purge Manual throttle valve assembly Controlle...
San Jose, CAYield Engineering YES R3 plasma asher
- Manufacturer: Yield Engineering
- Model: R3
sn 88033 Comdel CLF-500/50 Rf power supply Sort: 0
$12,900 USDSan Jose, CAYield Engineering YES Surface Treatment / Cleaning
- Manufacturer: Yield Engineering
- Model: YES
Good condition Yield Engineering YES Surface Treatment / Cleanings manufactured in 2010. Located in USA and other countries. Click request price for more information.
USAYield Engineering YES-450 Surface Treatment / Cleaning
- Manufacturer: Yield Engineering
- Model: YES-450
Good condition Yield Engineering YES-450 Surface Treatment / Cleanings manufactured in 2015. Located in USA and other countries. Click request price for more information.
USAYield Engineering YES-58 Surface Treatment / Cleaning
- Manufacturer: Yield Engineering
- Model: YES-58
Good condition Yield Engineering YES-58 Surface Treatment / Cleanings manufactured in 2010. Located in USA and other countries. Click request price for more information.
USA