Free vibrations in a bending beam (SE 110.58)
natural frequency on the freely vibrating bending beam Description: An oscillator, which is left alone after a single excitation, performs free vibrations. The frequency of the free vibration is the natural frequ...
Alberton, South Africa
Beam on two supports: bending moment diagram (WP962)
application of the method of sections to determine the bending moment Description: WP 962consists of a beam mounted on two supports which is subjected to point loads. The beam is cut at one point. At that point t...
Alberton, South Africa
Assembly of bending device (TZ 200.11)
GUNT course: engineering drawing Description: A drawing is the most important means of information and communication in engineering. The ability to read and understand drawings, graphics and schematics is a funda...
Alberton, South Africa
Ungraded Control Stone TO BS812-114, EN1097-8 (LAG150)
25kg ungraded. Used in the polishing Machine to provide a comparison against which the results of the aggregate under test can be measured. Due to the continuous development of our products, the goods supplied ma...
Alberton, South AfricaMould Plate TO BS812-114, EN1097-8 (LAG139/2)
For accelerated polishing machine to EN 1097:3, ASTM C29-97, AASHTO T19-93, BS 812, UNI 8520 :6, ISO 6872, CNR N. 62, CNR N. 63, CNR N. 64 Due to the continuous development of our products, the goods supplied may...
Alberton, South AfricaAggregate Impact Value TO BS812-112 (LAG165)
Aggregate Impact Value apparatus with mould to BS812:110 The AIV apparatus consists of a hammer with a trip action release, mould and automatic blow counter. All this is contained within a rigid frame to ensure f...
Alberton, South AfricaGraded Control Stone TO BS812-114, EN1097-8 (LAG150/G)
20kg Graded. -10mmSHPP +7.2mm slot Used in the polishing Machine to provide a comparison against which the results of the aggregate under test can be measured. Due to the continuous development of our products, t...
Alberton, South AfricaLos Angeles Abrasion Safety Guard Set (LAG179)
For LAG175 Los Angeles Abrasion Machine Three panel system. Each one measures 800mm high x 970mm wide x 30mm thick and weighs just 3 kg, with a 150mm x 200mm “Caution” warning sign on each panel. Due to the conti...
Alberton, South Africa75 mm ACV Measure TO BS812-110 (LAG160/1)
Spare for 75mm ACV to BS812:110 Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South AfricaMetal Measure For AIV TO BS812-112 (LAG165/1)
Spare for LAIV to BS812:110 Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South AfricaDensity Bottle 50ml Capacity, With Capillary Stopper (LGP040)
Unadjusted, glass The following density bottles are available from Laboratory Equipment Supplies: Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on th...
Alberton, South AfricaAbrasive Charges EN1097-2 (LAG177)
Set of charges to EN, NF Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South AfricaAbrasive Charges EN (LAG174)
12 (Annex A) Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South AfricaMicro Deval Stainless Steel Drum Without Steel Charges TO EN13450 (LAG180/3)
200mm diameter x 400mm long, for use with micro deval, 22kg Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South AfricaSpecimen Mould TO BS812-113 (LAG170/1)
With tray set to BS812:113 Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South Africa
Tip: Enter manufacturer, model or keyword