Used Processing in Japan

Kansai Chemical Machinery Manufacturing 3000L
- Manufacturer: 関西化学機械製作
Capacity: 3000L Design Pressure: Body F.V., Jacket 0.2MPa Design Temperature: Body 95°C, Jacket 132°C Type 2 Pressure Vessel Documentation Available
Hiroshima, Japan
SEC FK-22-10
- Manufacturer: エスイーシー
Cubic type Heat transfer area: 1.53m2 Design pressure: 2kg/cm2G
Hiroshima, Japan
Ikebukuro Horo Kogyo 2000L
- Manufacturer: 池袋琺瑯工業
Capacity: 2000L Design Pressure: Main Unit F.V. ~0.294 MPaG, Jacket 0.39 MPaG Outline drawing available
Hiroshima, Japan
Multitubular heat exchanger
Heat transfer area: 10m2 Material: Wetted parts SUS316 | Quantity saved: One
Hiroshima, Japan
1998 [Daiko Kakoki] Conical Dryer 1000L
- Manufacturer: 大興化工機
Can body 1200φ×1837 Design pressure: FV vacuum inside can ~3Kg / Jacket 3kg
Hiroshima, Japan
Dalton DV-1-100
- Manufacturer: Dalton
Total capacity: 220L with butterfly valve Power: 0.75KW | Purchasing area: 60Hz | Material: Gluing section SUS | Quantity saved: 1 unit
Hiroshima, Japan
2000 Kohken Powtech FS-J01-S
- Manufacturer: 粉研パウテック
Capacity: 20Kg/h max. ⇓Test run video⇓. Power: 0.4Kw200V | Quantity saved: 1
Hiroshima, Japan
2007 Buhler SDV 1100
- Manufacturer: ビューラー
Chilled roll Effective dimensions of roll: φ400×1100 Motor: 45kw Weight: 4.2 tons With board We were able to check the operation of each part individually, but the operation check using the board shows only roll ...
Hiroshima, Japan
2006 uzax 1050l
- Manufacturer: yooxax
Material: SS | Quantity saved: One
Hiroshima, Japan
2006 Veolia CMF12
- Manufacturer: ヴェオリア
PP hollow fiber membrane module (1.5m2 x 12 modules) ＜Basic design Leachate (after pretreatment, PH 6-9, water temperature 2-35°C, turbidity ava < 30°C) in continuous operation for 24 hours (backwash interval 60 ...
Hiroshima, Japan
1999 Mitsubishi Kakoki SJ-50F
- Manufacturer: Mitsubishi Kako Corporation
6500 rpm, 5520 L/h, explosion-proof specification Previous experience: refining fuel oil (C fuel oil) We only have enough for one set of disassembling tools, so the remaining two units will be purchased or manufa...
Hiroshima, Japan
Magellan PT-60
- Manufacturer: Mazellar
Mixing volume: 60 L Remarks Catalog Power: 0.2kw | Material: Main section SUS | Quantity saved: One
Hiroshima, Japan
2024 Tanabe Wiltech SHC-400D
- Manufacturer: タナベウィルテック
Material of main parts such as screws: SUS316 (stellited cutting edges). Currently 400V specification, but rewinding to 200V is available. Screen hole diameter 100mm Basket diameter φ400
Hiroshima, Japan
1979 Izumi Food Machinery Cylinder Vertical
- Manufacturer: Izumi
Jacket / stirrer (0.75 kw, two stirring blades) Closed type, with shower ball / manhole
Hiroshima, Japan
1984 Iwai machine cylinder vertical type
- Manufacturer: Iwai Machinery
Jacket / stirrer (2.2 kW, 3 propeller blades) ※ Satake Multi Mixer (360 rpm) Closed type, with shower ball / manhole
Hiroshima, Japan