Used Foundry & Casting in Wallonia, Belgium

Motorized casting ladle, 20 t, IBW

Year of construction: 2004 Weight: 12 000 kg with out the lining 6380 kg. With motorized tilting and remote control With intermittend gear (manual gearbox) frequency controlled With counterweight on the oversi...

2006 Motorized casting ladle, 14t, IBW

Vessel: depth: ø1750 mm, h. 1630 mm Height of the hook ±800 mm With motorized tilting and remote control With manual gearmotor, frequency controlled With counterweight on the overside With mechanical switch to "t...

2006 Motorized casting ladle, 14t, IBW

Door dimensions: depth: ø1750 mm, h. 1630 mm Motor: SEW, type: K47DT90L4BMG, 1,5 kW, 1410 rpm, 230/400 V Height of the hook ± 800 mm, with remote control With manual gear motor, frequency controlled With counterw...

Small casting ladles ROPER, 300 kg

• Manufacturer: Kleine

With oilbath gearbox In good working condition Outside dimensions: length 1100 mm, h. 850 mm | Inside: Ø 450 mm, h. 500 mm

Casting device with 4 ladles, ± 180 kg

Hand lip-poured ladles, content 150 - 200 kg (3 with cover and one without cover) With aerated suspension ring With hand wheel and locking

2007 Casting ladle ACETARC, 7 t

Type: ESSEX, serial number: 3123/67 With oilbath gearbox worm wheel and shaft number 4 With 2 spouts, without lining

Rest cast iron molds ±1000kg iron

Outer dimensions: Ø: 1000mm; Height: 470mm Internal dimensions: Ø 760 (top), Ø600mm (bottom), height: 350mm thick-walled

Casting ladle UTARD, 5- 6 t

With oilbath gearbox With 2 pouring spouts With heat protection shield, With steering wheel and air vented band

Gravity casting machine for bronze and brass EOLE

• Manufacturer: EOLE

Clamping plates 200x300 mm With old relay control With immersion basin movable on 3 axes With a tilting and rotating shelf

2002 Gravity die casting machine IMR C60X

• Manufacturer: IMR

Dimensions: Length: 3150mm; Width: 2500mm; Height: 1960mm 6KW; 400V; 50Hz Max opening of clamping plates: 700mm, side stroke: 335mm Hydraulic tank: 200l, max pressure: 60bar With 2 split dip tanks With light barr...

Casting ladle SENSENBRENNER, 2,2 t, without oilbath

• Manufacturer: Senssenbrenner

With gearmotor and oil bath To be modified with Rotostop In good condition

Base plate, cast iron, 130 - 150 kg

2012 Gravity die casting machine IMR C40H

• Manufacturer: IMR

Dimensions: Length: 2170mm; Width: 1916mm; Height: 1660mm 6KW; 380V; 50Hz With 2 divided dip tanks With light barriers With SIEMENS control Pressure 45-55bar

Casting ladle UTARD, 2 t, with teapot spout

With gearbox In good condition Inside: 900 mm x 900 mm | Weight: 800 kg

1992 Gravity die casting machine IMR C55

• Manufacturer: IMR

Dimensions: Length: 2600mm; Width: 2700mm; Height: 2000mm 5KW; 380V; 50Hz With 2 divided dip tanks With light barriers With SIEMENS S5 control unit