Used Wire Machinery

1977 Morgan 720,000 tpy, 5.5~13mm wire rod up to 80mm/sec,

• Manufacturer: Morgan
• Wire diameter: 13 millimeter

Specifications: Products that were produced on this Mill: Carbon Steel, Low Alloy Steel, Welding Wire, Free Cutting Steel, Tire Cord, PC Wire etc. WIRE ROD Main equipment : A. Roughing mill group (Roughing Mill) ...

LUBOW T1V

• Manufacturer: Lubow

Max wire diameter: 3/8" | Speed range: Up to 1260 Cuts Per Minute | Motor: 1 HP

RMG 34-07244-87

• Manufacturer: RMG

Maximum wire diameter (alloy): .187" (4.7mm) | Maximum wire diameter (mild steel): .250" (6.4mm) | Hp: 7 | Capstan diameter: 20" | Feed speeds (fpm): 244 | Electrics: 460V / 3PH / 60Hz | Approx. floor size: 33" ...

Penn 2BMTS

• Manufacturer: Penn

Capacity: 1/2" wire 1' Tubing | Rotation: 420 DEG | Table size: 24" x 60" | Approx. weight: 750 LBS | Equipped with: 6 Position TurretTooled for Square Tubing

RMG 45-15460-87

• Manufacturer: RMG

Wire diameter range: .250" - .312" | Electrics: 460V/3 PH/60Hz | Capstan diameter: 20" | Hp: 15 | Speed range fpm: 460 | Approx. floor size: 33" x 37" x 50" H

LUBOW ML 10

• Manufacturer: Lubow

Capacity: 5 Pieces 3/8" Wire | Rotation: 400 Degrees | Rotating disc: 10" | Table size: 24" x 60" | Approx. weight: 900 lbs | Equipped with: With Infinitely Adjustable Bending Post Position &  Foot Pedal

American No Model

• Manufacturer: American

Pneumatic Bender

LUBOW WBR 1 2S

• Manufacturer: Lubow

Car-Anth Model A

• Manufacturer: Car-Anth

Rotating disc: 6"

WAFIOS BT20

• Manufacturer: Wafios
• Wire diameter: 1,981.1999999999998 millimeter

Maximum wire diameter: .078" | Wire length: .55" - .90" | Pieces per minute: 230 | Dimensions: 83"L x 40" W x 45" H | Weight: 2640 pounds | Equipped with: Equipped with Manual One Shot LubeDrive 3 HP Motor & Con...

LUBOW 4-SAB

• Manufacturer: Lubow

1 wire: 1/2" | 3 wires: 3/8" | 4 wires: 5/16" | 8 wires: 1/4" | 11 wires: 3/16" | 16 wires: 1/8" | Equipped with: Can Make 1,2,3 Or 4 Bends Per Cycle 8' Max Distance Between Bends Up To 40,000 Bends Per Hour Usi...

LUBOW ML 6

• Manufacturer: Lubow

Capacity: 3 Pieces 5/16" Wire 2 Pieces 3/8" Wire | Rotation: 400 Degrees | Rotating disc: 6" | Table size: 24" x 60" | Equipped with: With Infinitely Adjustable Bending Post Position & Foot Pedal

RMG 34-0366-75

• Manufacturer: RMG
• Model: 34-0366-75
• Wire diameter: 6,350 millimeter

Capstan diameter: 20" | Maximum wire diameter (mild steel): .250" | Maximum wire diameter (alloy): .187" | Speed range: 66 FPM | Hp: 3 HP | Approx. floor size: 33" L x 35" W x 50" H