Used Machine Tools in Saxony, Germany

SMW Autoblock 105510 (Nr.40)

• Manufacturer: SMW Autoblock

Power chuck, automatic clamping Features: Equipped with forming jaws Clamping range min./max. 60 / 320mm Flange mounting Ø 295x5mm inside; mounting 3x holes Ø 21mm and pitch circle Ø 230mm

Forkardt KS 400 (Nr. 45)

• Manufacturer: Forkardt

Power chuck, mechanical Features: Power flange AKS 315/5 Clamping range min./max.: 60/240mm Flange mounting size Ø 300x5mm inside; fastening 3x hexagon socket screws Ø 20mm and 3x holes Ø 20.5mm / pitch circle Ø ...

WMW PS 300

• Manufacturer: WMW

technical features: - 4 jaw chuck, manual feed, clamping range: outside= max. Ø 280mm as well as inside=min. Ø 40mm

1989 SCHNUPP HYDRAULIK 11-38-D-31496

• Manufacturer: SCHNUPP HYDRAULIK

TRANSFER TABLE - TRANSFER TROLLEY - TOOL CHANGING SYSTEM Possible application: for press tools/devices as interchangeable trolleys in press lines

ATLAS COPCO angle drilling machine

• Manufacturer: Atlas-Copco

Angle drilling machine ATLAS COPCO LBV16 045-91 8421 0110 38 used, checked ! with operating instructions !

ATLAS COPCO angle drilling machine

• Manufacturer: Atlas-Copco

Angle drilling machine ATLAS COPCO LBV16 045-91 8421 0110 38 used, tested ! with operating instructions !

WMW AW1000x800x640

• Manufacturer: WMW

clamping surface is roughly machined good used condition, slight traces of use T-slots according to DIN 650: a=28mm; b=49mm; c=21mm; h=50mm distance T-slot : T-slot= 160mm

VAN MARK cooling slot punch

Cooling slit punch, Slit punch, Hand lever punch VAN MARK PRODUCTS CORPORATION TRIM-A-LOUVER used, tested !

WMW AW 330x310

• Manufacturer: WMW

Application: Machine table adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm distance 100mm swivelling via tooth guide +90° rotatable 360° Base Ø 350mm with 2x clamping groov...

Incluido

• Manufacturer: Pagus

Machine vice PAGUS on rotary table with graduation 360° rotatable

PAGUS compact tensioner

• Manufacturer: Pagus

NC compact vice, machine vice PAGUS with prism jaw

Emag VCL 630/800

• Manufacturer: Emag

VERTICAL MULTIFUNCTIONAL HEADSTOCK UNIT FOR VLC 800 MT TURNING MILLING (see last photo for comparison) The headstock unit of the EMAG machines of the VLC series is characterised by short strokes, high rapid trave...

1999 WMW 5500x1500x250

• Manufacturer: WMW

- distance of T-slots = 542 / 500mm in a parallel offset order - T-slot according DIN 650 - a=28,0mm; h=48,0mm; b=48,0mm; c=22,0mm - incl. adjustment screws and covering caps i.D.

WMW 800x300

• Manufacturer: WMW

surface plate does have holes! Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Table length: 800 mm | Table width: 300 mm | Table height: 130 mm | Weight...

WMW 660x450

• Manufacturer: WMW

fall trough hole 115mm T-slots : according to DIN 650 and 508 a=22mm b=38mm h=40mm c=17mm