Used Machine Tools in Gauteng, South Africa

Gildemeister NEF-CT-20 Lathe

• Manufacturer: Gildemeister

2003 Magh RAS 700 Radial Arm Saw

• Manufacturer: Magh

2003 Magh RAS 700 Radial Arm Saw

• Manufacturer: Magh

STC Tonco 250amp Single Phase Welder on Trolley

Lincoln 400AS-50 Arc Welder/Generator

• Manufacturer: Lincoln

STC 2013 OMAC F120.AF.45.2 Hydraulic Puller

• Manufacturer: Omac

Spirit Level With Magnetic

IWM HYDRAULIC DOOR PRESS

• Manufacturer: Unknown

Fully serviced and quality guaranteed 5 Cylinder press (3 Vertical, 2 horizontal) 380V / 3 phase

IWM R20 ECCENTRIC PRESS

• Manufacturer: Unknown

Adjustable stroke Capacity: 20 ton | Strokes per minute: 150 | Bed: 570 x 440

Bandsaw 220v

Deformation of bars under bending or torsion (WP 100)

elastic deformation of statically determinate or indeterminate beams under bending load Description: Bending and torsion are typical loads to which components are subjected. The resultant stresses and deformation...

Beam on two supports: bending moment diagram (WP962)

application of the method of sections to determine the bending moment Description: WP 962consists of a beam mounted on two supports which is subjected to point loads. The beam is cut at one point. At that point t...

Assembly of bending device (TZ 200.11)

GUNT course: engineering drawing Description: A drawing is the most important means of information and communication in engineering. The ability to read and understand drawings, graphics and schematics is a funda...

Free vibrations in a bending beam (SE 110.58)

natural frequency on the freely vibrating bending beam Description: An oscillator, which is left alone after a single excitation, performs free vibrations. The frequency of the free vibration is the natural frequ...

Ungraded Control Stone TO BS812-114, EN1097-8 (LAG150)

25kg ungraded. Used in the polishing Machine to provide a comparison against which the results of the aggregate under test can be measured. Due to the continuous development of our products, the goods supplied ma...