Used foundry machines

Hopper with dischargingbelt

Bunker with extraction belt for moulding machine ULLRICH + ROSER Content ± 4,3 m³, belt, 650 mm x 600 mm Driven by moto- gearbox and chain Output ± 0,6 m³/min Shaft 1600 x 2000 mm, h. 1950 mm

1998 Gassing unit coldbox LÜBER LW-FDA-825i

• Manufacturer: Lüber
• Model: LW-FDA 825

Gas pressure is regulated by proportional valve Gas dosing is made by high speed counting All parameters are introduced in the machine panel -gassing pressure -main gassing pressure -pressure ramp -gassing time -...

1999 Core shooter DISA, 200 l

Type: GFD 200 MP, serial number: KB0 001 Construction year: 1999, weight: 24 t Core box: Maximum height: 1340 mm, minimum: 870 mm Maximum width: 1500 mm, minimum: 530 mm Machine table: 1100 mm x 1300 mm, table li...

Ladle heating station PROMEOS

• Manufacturer: Prometeos

Serial number: 00131010360µYear of construction: 2013 Dimensions: Length: 2000mm, Width: 2200mm; Height: 2600mm Made for siphon pans Burner insert 600mm For natural gas H; 10 ±0,05Wh/m³ Each machine has an operat...

1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

Core shooter GUT/KUHN, 100 l

• Manufacturer: Kuhn

Type: Mono 100, serial number: 0168 100 l core shooter for horizontal separatet core boxes With sand cooler/heather With roller conveyers With dust filter With automatic sand mixing unit (Mixer IMF) T36/6 The mi...

Core shooter LAEMPE L40, shot volume 40 l

• Manufacturer: Laempe / Röperwerk

Shot volume 40 l Machine designed for vertical and horizontal separated core boxes Core box dimension: length: max. 1140 mm; width: max. 1180 mm; height: max. 940 mm - min. 535 mm Core box fixing by original LAEM...

Bottom pouring ladle with planetary gear, 8 t

Brand: FOUNDRY SERVICE, serial number: 4827 With one bottom pouring device ,with out horizontal arm and plug bar are not inclluded With 2 pouring spouts

2010 Core shoter RÖPER H80 , 80L, with mixer

• Manufacturer: Laempe / Röperwerk

Brand: RÖPER / GFA / UGS, type: H80Construction year: 2010, weight: ± 8000 kgDimensions: 3750 mm x 2840 mm x 4400 mmCore box: 1000 mm x 800 mm x 1000 mmRÖPER machine with top mounted GFA screw mixerWith 2 pumpsWi...

Permeability tester GF, type SPDU

• Manufacturer: GF

External dimensions: Width 400 mm, Depth: 230 mm, Height 480 mm

Automatic core shooter LAEMPE L10

• Manufacturer: Laempe / Röperwerk

All movements are hydraulic with hydraulic unit Vacuum side clamping, plates 700 mm x 200 mm Core extraction slide 380 mm x 300 mm With gassing plate Maximum core box dimensions: width ± 700 mm, depth ± 650 mm, h...

Degassing unit (impeller) BOMA

• Manufacturer: BOMA

Dimensions: Length: 2300 mm; Width: 900 mm; Height: 2980 mm Minimum height under arm: 1400 mm; maximum: 2600 mm 2.5 kW, 400 V; 16 A; 50 Hz With blade With CE certification With Siemens S5 control system On a trol...

2000 Mobile hydraulic wedge station HOLMATRO

• Manufacturer: Holmatro

Dimensions: Length: 800mm; Width: 400mm; Height: 1000mm Wedge dimensions: 800mm; Jaw length: 280mm 7.5kW, 3×400V; 1450rpm; 50Hz 20MPa With 1 wedge With spring balancer

2000 Mobile hydraulic wedge station HOLMATRO

• Manufacturer: Holmatro

Dimensions: Length: 800mm; Width: 400mm; Height: 1000mm Wedge dimensions: 800mm; Jaw length: 280mm 7.5kW, 3×400V; 1450rpm; 50Hz 20MPa With 1 wedge With spring balancer