Used foundry machines

Jolt squeeze moulding machine BMD; ARPA 300

• Manufacturer: BMD

Dimensions: Width: 960mm; Deepth: 1400mm; Hight: 2230mm Tightening: 1300mm; Turning out: 220mm with pin lifting With emergency stop (pneumatic) capacity of tightening dynamic : 15T, static: 5T;

Jolt squeeze moulding machine BMD; ARPA 300

• Manufacturer: BMD

Dimensions: Width: 960mm; Deepth: 1400mm; Hight: 2230mm Tightening: 1300mm; Turning out: 220mm with pin lifting With emergency stop (pneumatic) capacity of tightening dynamic : 15T, static: 5T;

Sand papering machine 1x plaine, 1x cylinder

• Manufacturer: ZEISS-APTON

Type: 1RA300, serial number: 14057 Motor SACHSENWERK, type: AD2-5/4, serial number: 362854, 1,2 kW, 220/380 V, 1410 rpm Ø plain 395mm, cylinder for sandpaper Ø 110mm, length 150mm With suction hood 2x, suction tu...

Vibrating crusher VIBRA MILL, ± 20 t/h

Brand: GENERAL KINEMATICS, type: VM 160 VIBRA MILL Slots 90 mm x 15mm, after mesh 3 mm With 3 vibrating motors VIB TEC 2 x 11 kW; 380 V and 1 x 5,5 kW; 380 V On for 4 springs, outside Ø 240 mm

Jolt-squeeze moulding machine ZIMMERMANN GO/2B

• Manufacturer: Zimmermann

This machine shakes under pressure Number: 134150 | Press pressure: 3000 kg | Payload: max. 120 kg | Weidth max. moulding boxes: 450 mm | Table size: 570 mm x 430 mm | Press stroke: 90 mm | Lifting stroke: max. 1...

Grinder 1 stone and 1 grinding line MAPE

• Manufacturer: Mape

Type: MR408, serial number: 69-19654 3,5 Kw, 220/380 V, 50 Hz, 1500 rpm With switchbox TELEMECANIQUE Width of band 100mm, without shelf, with one reserve grinding line Stone side with shelf, width 120mm, length 8...

Horizontal band sandpapering machine, 450 mm x 150 mm

Mounted on a table, 950 mm x 600 mm Outside dimensions: 450 mm x 150 mm | Motor: 1,5 hp, 1460 rpm, 220/380 V

1980 Moulding machine KÜNKEL WAGNER, APM.f1

• Manufacturer: Wagner

Moulding machine without foundation With pneumatic drived head pivoting With pneumatic table vibrator

1993 Sample grinder DELTA LF350

• Manufacturer: Delta
• Model: LF350

External diensions: Width: 1050mm; Depth: 870mm; Hight: 1760mm Usable dimensions: length: 250mm; Width: 150mm; 3KW; 220/380V ; 2840r/min Ø200mm Stein; Bohrung Ø78mm Without waterpump

1998 Semi-automatic cutting grinder

• Manufacturer: KANI

Movement by threaded rod Motor 1,1 kW Disque moved by threaded rod

Double grinder for work shop HILAX

• Manufacturer: HILAX

Weight: 60 kg Weight: 60 kg

1982 Semiautomatic shell moulding machine CRONING SHELL

With hot-box: G&F + FMI, type: FM10C 450 x 320 mm, 1 fix side, 1 mobil side Speed ± 250 mm, Gasheating with sand hopper

Vibrating polishing machine, brand RÖSSLER 2.2x0.6 m.

Type: R1000LT, serial number: 145/77 In good condition 2 vibrating motors, 220 / 380V With stainless steel basin, agitator, pre-separator With sludge pump (compressed air) Tank with polyurethane filter

Moulding machine MALCUS SPO400, table 730 mm x 1120 mm

• Manufacturer: Malcus

Molding machine for turn over 300 mm stroke release Mould max 800 mm

Gravity die casting machine, Hydraulic 600×400mm

Dimensions: Length: 2500mm; Width: 750mm; Height: 1500mm 3 guides Without hydraulic unit