- Trusted Seller
16 x 54 in. Monarch Lathe, DRO, Chucks, more
- Manufacturer: Monarch
- Model: 16
"Great condition, well maintained by experienced operators, normal wear from use!" 16″ x 54″ Monarch lathe, FULLY Equipped DRO, Taper, more. EQUIPPED: * Digital Read Out 2 axis * Taper turning attachment * 3 Jaw ...
$4,750 USDMontreal, Canada - Trusted Seller
4′ x 9″ MEUSER RADIAL DRILL
- Manufacturer: Meuser
4 x 9″ MEUSER RADIAL DRILL MODEL: M35R SPECIFICATIONS: DIAMETER OF COLUMN ..................... 9″ MAX DISTANCE SPINDLE TO COLUMN ......... 48″ MIN DISTANCE SPINDLE TO COLUMN ......... 6-1/2″ MAX DISTANCE SPINDLE...
$4,500 USDMontreal, Canada - Trusted Seller
Proturn Lathe
- Manufacturer: Proturn
SPECIFICATIONS (Approximate imperial dimensions) Swing over bed.......................................................... 430 mm (17") Center distance.......................................................... ...
Vaudreuil-Dorion, Canada - Trusted Seller
Turret Lathe- “Warner & Swasey, Electro-Cycle, #10
- Manufacturer: Warner & Swasey
This lathe WORKS. We tried it. We verfied: our W & S Electrocycle spindle turns, the cross slide works and the turret rotates fine in all six indexed positions... We put it under power and each basic functions wo...
$1,400 USDMontreal, Canada 
Giant finishing
- Manufacturer: Giant finishing
Giant finishing GO series vibratory deburring equipment. Working on 460 volt 3ph. Automatic greasing
Soitaab Plasma Cutting Machine
- Manufacturer: Soitaab
The real plasma solution “ plug and play ”, Plasma RED has been designed to perform at its best capability with the most common plasma supply present in the market. Designed for cutting ferrous, steel and aluminu...
Pointe-Claire, Canada- Trusted Seller
Steel-Master Press Brake PBK63/1600
- Manufacturer: Steel-Master
Marque: Steel-Master | Modèle: PBK63/1600 | Capacité: 68” X 60 Tons
Vaudreuil-Dorion, Canada - Trusted Seller
24 x 160 in. Lathe, TOS Mod. SN63B
- Manufacturer: TOS
"Normal wear from regular use, ways protected with synthetic paste during storage!" 24″ x 160″ TOS Engine Lathe, power feeds, Mod. SN63B Swing...............................24 in. Center dist........................
SMI BPR 54X2 Tube End Closer
- Manufacturer: SMI
BPR 54X2 The BPR range of machines allows you to close the copper tubes by the outside deformation of the ends. The “plane end sealing” exclusive system, applied with a stopped tube, allows a safe working of endl...
Pointe-Claire, Canada- Trusted Seller
5′ Radial Drill, Kitchen & Wade (V.G. England)
- Manufacturer: Kitchen & Wade (England)
5 ft. Radial Drill, Kitchen & Wade, (England), power feeds, coolant, etc. Features: * Power arm elevation, direct-drive. * 36″ x 36″ box table. * Coolant pump * Rapid column clamping Price, loaded, no charge, our...
- Trusted Seller
1996 KIESERLING H530
- Manufacturer: Kieserling
Equipped With *Bushing cutoff *IFO transfer *TKO Cutoff diameter: 2 to 8 mm | Cutoff length: 4 to 51 mm | Die tko: 4 to 51 mm | Production range: 260 ppm (300 PPM) | Heading force: 300 KN
Montréal, Canada - Trusted Seller
Vaudreuil-Dorion, Canada 
TubexMachinery LPC 160 Vs Tube Polishing
- Manufacturer: TubexMachinery
D = 5-50 mm R1 min. 80 mm S = 622 mm Disc = 1,1 kw (2" max) R2 = 1,5 x Ø mm L = 30 mm Belts = 2.2 kw Looking for a high-performance tube polishing machine that delivers ex...
Pointe-Claire, Canada
TubexMachinery LT 130 WET Tube Polishing
- Manufacturer: TubexMachinery
D = 10-127mm S = 2000mm Disc = 2.2KW 1-20m/min (5" max) L = 120mm Belt = 5.5kw Feed = 2 x .025kw Also our orbital abrasive belt polishing machine LT 130 WET, as its counterpart LT 130, is ...
Pointe-Claire, Canada
TubexMachinery LT 130 Tube Polishing
- Manufacturer: TubexMachinery
D = 10-127mm S = 2000mm Disc = 2.2KW 1-20m/min (5" max) L = 120mm Belt = 5.5kw Feed = 2 x .025kw Abrasive belts orbital grinding machine type LT 130 is a machine with planetary polishing s...
Pointe-Claire, Canada
Tip: Enter manufacturer, model or keyword