Used Construction in Vienna, Austria

2007 Bauer BG 24V

• Manufacturer: Bauer
• Model: BG24
• Horsepower: 400 hp
• Hours: 11,500 h

Operating hours: 11500 | Kelly bar: 4/34 m | Feed winch: . | +: new hydraulic pump and new hydraulic motors

Bobcat - T450 - 2022 - Mini excavator

• Manufacturer: Bobcat
• Model: T450
• Horsepower: 61 hp
• Lifting capacity: 635.03 kg

Tracked Skid Steer Loader BOBCAT T450 2022 by means of code key, crawler undercarriage with rubber tracks, Tracked profile heavily worn, built-up Low profile bucket NEP42-15L7101277, working width approx. 140 cm,...

2017 Eurocomach ES 85 ZT 4 + Comacchio CPH 2.2

• Manufacturer: Comacchio
• Model: CPH
• Hours: 4,300 h
• Machine weight: 9,000 kg

Operating hours: 4300 | Weight: 9000kg | +: rods and casings handling device

2008 Atlas Copco XAS 186 air compressor

• Manufacturer: Atlas-Copco
• Model: XAS 186
• Hours: 4,232 h
• Fuel type: diesel

Operating hours: 4232 | Flow rate max.: 11.1 m³/min. | Delivery pressure max.: 7 bar

2011 Hut HG 24 rotary head

• Manufacturer: Hut

+: hydraulic rotary drive | Torque: max. 26.5 kNm

Atlas Copco COP 1038

• Manufacturer: Atlas-Copco

+: suitable for self-drilling anchors

2007 Eurodrill RH 1400

• Manufacturer: Eurodrill
• Machine weight: 425 kg

Weight: 425kg | Torque: max. 16800 Nm | Speed: max. 166 rpm | Optional: Hollow shaft 92 mm

Liebherr

• Manufacturer: Liebherr

+: 2 x 6 m intermediate boom HS 832

2001 inch winch 56 WH20 / 16

• Manufacturer: Bauer

Line pull: 100 kN | Rope diameter: 22 mm | Hydraulic engine: A2FM125 / 61W | Use: BG 12, RG 20

Bauer KDK 140

• Manufacturer: Bauer
• Machine weight: 4,650 kg

Weight: 4650kg | Drill head: 140 kNm | Optional: SOB equipment

Meyco GM

• Manufacturer: Meyco

Bauer BG 9 Kelly 292/3/18

• Manufacturer: Bauer
• Model: BG9
• Horsepower: 182 hp
• Machine weight: 2,680 kg

Weight: 2680kg | Drilling depth: 18 m | Total length: 8,2 m

2007 Comacchio MC 500

• Manufacturer: Comacchio
• Model: MC500
• Horsepower: 74 hp
• Machine weight: 8,000 kg

Weight: 8000kg | Operating hours: Total: 15303 Replacement engine at approx. 9000 | Drill head: CT 34 | Torque: 5600 Nm | Speed: 100 rpm. | Feed retraction force: 65 kN | Winch: 4 kN | +: Oiler | Water pump: 30 ...

1990 Atlas Copco H 135

• Manufacturer: Atlas-Copco
• Model: H135
• Horsepower: 20 hp
• Hours: 4,200 h

Operating hours: 4200 | +: 2 arm jumbo drill + loading basket | Hammer drill: 2 x COP 1838

1991 Klemm MR 701

• Manufacturer: Klemm
• Model: MR 701
• Machine weight: 3,000 kg

Weight: 3000kg | Hydraulic power unit: 55 kW electric | Rotary drive: KH 9; 10 kNm | Clamp/break: max. diameter 220 mm | Telescopic crawler: 750 - 1100 mm | Feed: Telescopic carriage; 27/ 40 kN