Building Filters
WOTAN M3
- Manufacturer: Wotan
Command: Heidenhain | X axis course: 3.000 mm | Y axis course: 1.500 mm | Z axis course: 1.000 mm | Table dimensions: 3.300 x 1.250 mm | Conical seat: HSK63 | Main engine power: 54 Kw | Maximum rotation: 15.000 ...
Limeira - State of São Paulo, Brazil
WOTAN FUSO 105
- Manufacturer: Wotan
X axis course: 1.500 mm | Y axis course: 1.200 mm | Z axis course: 1.000 mm | Conical seat: ISO50 | Table dimensions: 1.000 x 1.000 mm | Permissible weight on the table: 4.000 kg
Limeira - State of São Paulo, Brazil
2003 WOTAN H3
- Manufacturer: Wotan
Command: Siemens | X axis course: 1.000 mm | Y axis course: 800 mm | Z axis course: 630 mm | Pallet dimensions: 800 x 800 mm | Admissible weight: 4.000 kg | Maximum rotation: 4.000 rpm | Conical seat: ISO50 | Ma...
Limeira - State of São Paulo, Brazil
CNC WOTAN WOMAT M2
- Manufacturer: Wotan
Command: Heidenhain/Diadur | X axis course: 800 mm | Y axis course: 500 mm | Z axis course: 500 mm | Table surface: 950 x 500 mm | Maximum rotation: 6.000 rpm | Conical seat: ISO40
Limeira - State of São Paulo, Brazil
Wotan brand horizontal machining center model XB-530
- Manufacturer: Wotan
The machine is located inside the factory, connected, and working perfectly. Dear customer, this is a used machine and will be sold as is. Therefore, if you have any questions about its operation, product conditi...
1998 CNC MILL WOTAN
- Manufacturer: Wotan
CNC MILL Wotan Siemens Sinumerik 810D Control Precise and robust machine
Joinville - State of Santa Catarina, Brazil1998 CNC MILLING MACHINE WOTAN WOMAT M1L
- Manufacturer: Wotan
CNC MILLING MACHINE Wotan Womat M1L Year 1998 Siemens 810 Control Fixed Table Chip Conveyor BT40 8,000rpm
Wotan brand CNC milling machine model M2 (XYZ) 800 x 500 x 550 mm
- Manufacturer: Wotan
Machine is on and operating normally within the factory. New linear guide, under warranty, and the drives too. Great opportunity.
Wotan Gear Generator, Model HWFII, Module 12
- Manufacturer: Wotan
It will be delivered with approximately six modules. The original electrical panel was very old, so a new one is being made. The motors have been rebuilt. It is possible to connect it in the current location, but...
2009 CNC Portal Milling Machine brand Wotan model TWGT-2000
- Manufacturer: Wotan
Wotan Portal Milling Machine Model TWGT-2000 Year 2009 XYZ axis strokes 3500 x 1200 x 750 mm Heidenhain control 18,000 RPM Working in industry
2003 Wotan H3 XYZ Horizontal Machining Center 1000 x 800 x 630 mm
- Manufacturer: Wotan
Horizontal Machining Center Wotan Brand Womat H3 Model XYZ Axis Strokes 1000 x 800 x 630 mm B Axis 360,000° Two 800 x 800 mm Tables Table Weight Capacity 4 Tons ATC Tool Magazine for 40 Tools ISO-50 Taper 130/36 ...
Wotan M3 Fixed Bench CNC Milling Machine
- Manufacturer: Wotan
Wotan Fixed-Bench CNC Milling Machine Model M3 XYZ-axis strokes 3000 x 1000 x 1450 mm Table size 3300 x 1000 mm 15,000 RPM 24-tool changer Upgraded from 3000 RPM to 15,000 RPM with 54 kW of power and an HSK-63 to...
