Used Wolf Processing in Germany

Cutting unit WOLF - for KS-350, painted

• Manufacturer: Wolf

WOLF Agitator Tank

• Manufacturer: Wolf

Agitator containers of type RB basically consist of a double-walled container, which is generally heated with hot water, and an agitator that keeps the mass moving steadily. The movement facilitates the exchange ...

Belt Coater CoatMaster WOLF

• Manufacturer: Wolf

Belt Coater WOLF Type DRA DRA-600 with approx. 60 litres production volume DRA-800 with approx. 80 litres production volume DRA-1200 with approx. 240 litres production volume DRA-1600 with approx. 330 litres...

Air cooling tunnel WOLF

• Manufacturer: Wolf

The cooling duct in stainless steel design and other non-rusting materials. The duct is equipped with stainless steel bonnets with polyurethane foam filling. For inspection and cleaning work, the bonnets can be ...

Mobile agitator tank WOLF

• Manufacturer: Wolf

The jacket and bottom of the tanks are double-walled, designed for hot water heating. The top cover of the container is divided, one half is designed as a hinged lid. A limit switch stops the agitator as soon as ...

Block melting tank WOLF

• Manufacturer: Wolf

The melter is designed for heat treatment (melting, heating, etc.) of confectionery fats and glazes. It is used to melt down butter, cocoa butter, chocolate, margarine, ice cream, condensed milk and various conf...

Paddle mixer WOLF Type WPM-150

• Manufacturer: Wolf

Paddle mixer WOLF Type WPM-150 with a volume of approx. 150 liter. - One horizontal agitator with paddles for gentle mixing of cereals and other ingredients. - Smoothly adjustable mixing speed (inverter install...

turntable WOLF - type TT-320-180°-R

• Manufacturer: Wolf

with approx. 320 mm working width.

Air cooling duct WOLF - Type W-S/K-1300

• Manufacturer: Wolf

The duct is equipped with contact cooling by circulating cold water at the bottom and radiation from above. The channel consists of: - 1.5 m infeed table with extendable deflection bar - 12 m cooling channel w...

Second hand Mould and cooling roll WOLF - type F-1250

• Manufacturer: Wolf

incl. rotation connector for cooling water feed-through. The roller is installed in a stable tubular frame and can be adjusted in working height up to 60 mm. The roller surface is ground and hard-chrome plated. ...

Air cooling tunnel WOLF W-S/K-420-ECO in stainless steel

• Manufacturer: Wolf

The channel is covered with stainless steel bonnets Working width: approx. 420 mm Inlet table: approx. 2.5 metres Cooling section: approx. 17.6 metres Outlet table: approx. 2.0 metres

Air cooling module + dry cooler WOLF - Type LKTA-200 with FKL-907, built in 2008.

• Manufacturer: Wolf

2006 Wolf centrifugal roof fan - DV40-28-4/4-S 22942

• Manufacturer: Wolf

Fan, ventilator, electric motor, blower, radial roof fan, emergency ventilator, flue gas fan

Wolf small high-speed packaging machine for bags with a filling volume of up to 2 litre

• Manufacturer: Wolf

Slightly used Wolf VPP 180 Mini-Master tubular bag packaging machine. The machine was located in a pharmaceutical company's cleanroom and was used for experimental trials. The machine did not run continuously in ...

Second-hand heat exchanger (decrystallizer) - WOLF type G-C-1,5/20 approx. 1.000 kg/h.

• Manufacturer: Wolf

The heat exchanger is suitable for the de-crystallization of previously tempered chocolate masses by heating the mass. Flow capacity: approx. 1.000 kg/h temperature max. : approx. 110°C working pressure: approx. ...