Used basic

Wire Trimmer & Bender

Equipped With: 3 Hydraulic Heads for Trimming Wire & Bending Dies 8' Table Length Palm Button Controls 10 HP Motor

SHUSTER 2A4V Wire Straightener & Cutoff Machine

• Manufacturer: Shuster

Equipped With: 15 HP Main Motor Extra Roller Dies Capacity, basic wire: .125-.312 Dia. | Feed rate (variable): 20-2000 FPM | Rack length: 120"

2001 U.S. Baird S-3FVB

• Manufacturer: U.S. Baird

NILSON S-3FVB Four-Slide NILSON S-3FVB, 1-3/16" Max Diameter Basic Wire, 2" Max Width Strip Metal, 15" Standard Feed Length, 32 - 130 SPM, 2001 Standard Slide Strokes Press Data EQUIPPED WITH: Air Clutch and Brak...

BAIRD MACHINE #2

• Manufacturer: U.S. Baird

Basic wire diameter: 1/8" | Maximum strip width: 1" | Standard feed length: 8" | Stroke per minute: 67-200 | Motor: 2 HP | Equipped with: With StraightenerE-Manual Available

Sleeper & Hartley 721

• Manufacturer: Sleeper & Hartley

SERIES 721, SLEEPER & HARTLEY SPRING COILER WIRE RANGE .............. .018" TO .080" STANDARD GROOVING ....... .024 - .038 .056 - .080 BASIC WIRE FEED RANGE ... 0 TO 145" COIL RANGE .............. 1/8" TO...

1992 U.S. Baird 700 LV

• Manufacturer: U.S. Baird

Nilson 700 LV Four-Slide Nilson 700 LV, 1/32" Max Diameter Basic Wire, 3/8" Max Width Strip Metal, 3-3/8" Standard Feed Length, 1.5 hp, 20-540 SPM, 1992 Standard Slide Strokes Press Data EQUIPPED WITH: Electric C...

2006 KOCH KGT 47/1

• Manufacturer: Koch
• Model: KGT 471

Capstan diameter: 1200mm (47.24") | Basic wire diameter: 14mm High Tensile (.551") | Maximum drawing speed: 1.75 M/S (295) FPM | Motor: 129 kW (173 HP) | Electrics: 480V/60Hz/3 Phase | Equipped with: With Siemen...

WELLS 6N #81715

• Manufacturer: WELLS

SPECIFICATIONS: LENGTH WIRE RANGE * SPECIFICATIONS SUBJECT TO VERIFICATION *

1990 NILSON S3F

• Manufacturer: Nilson
• Model: S3F

Basic wire diameter: 3/16" (4.8mm) | Maximum width strip: 2" (51mm) | Standard feed length: 15" (381mm) | Spm: 32 - 130 | Front slide stroke: 1-3/4" (45mm) | Side slide stroke: 3-1/2" (89mm) | Rear slide strok...

NILSON S-3F

• Manufacturer: Nilson

Basic wire diameter: 3/16" (4.8mm) | Maximum width strip: 2" (51mm) | Standard feed length: 15" (381mm) | Spm: 32 - 130 | Front slide stroke: 1-3/4" (45mm) | Side slide stroke: 3-1/2" (89mm) | Rear slide stroke:...

1980 NILSON S3F

• Manufacturer: Nilson
• Model: S3F

FOUR SLIDE WIRE MACHINE Max Diameter Basic Wire: 3/16" Max Width Strip Metal: 2" Std. Feed Length: 13" * Electric clutch

RMG In-Line Wire Drawing Machines

• Manufacturer: RMG

RMG In-Line Wire Drawing Machines Capstan Dia Range: Tensile: 10' - 60" In-Line Wire Drawing provides numerous benefits for fastener and wire products industries, listed below are a few of them. •Lower Material C...

Hangji Coil Stripper Stripping Machine in Wire Rod Production Line Steel Plant

• Manufacturer: Hangji

A . Main parameters: 1.Host size: 7. 9m x 2.5meters, open double door, width 4.8 m. 2.Two wire disk size: 1.75m x 1.75m 3.Two wire disk side by side, with host distance about 0.85m. The spacing is about 1. 5m. 4....

Rebar Shear Machine Steel Iron Metal Cutting Machine Rebar Shearing Line

• Manufacturer: Feihong
• Model: FHS-150

Packing & Delivery Rebar shearing line will be nude packed in container, the parts and tool will be packed in wooden case.suitable for long distance sea shipment. Our company has basically achieved the world-wide...