Used Processing in Canada

1,000 Litres Stainless steel tank with heating coil

-Cone bottom with a 2" Drain -Heating coil in the middle of the tank -4 Stationary legs of tank are 22" tall -Tank dimensions: 36" diameter x 60" tall -Shipping: Height 95" x Width 45" x Length 45" -Man whole on ...

909 Liter Stainless steel tank with dome bottom

-4 stationary legs that are 30" tall -Dome bottom with a 3" drain on bottom -1" valve on the side at the bottom -Manhole on top -Tank dimensions: 35" diameter x 58" tall -200 IMP Gallon

Gandus Saldatrici Tb - 3 Grease line heat Sealer

• Manufacturer: Gandus

-Shipping dimensions: Height - 20" x Width - 29" x Length - 16" -115 V -50/60Hz -Comes with case

227 Litres above ground steel tank for fuel/Oil

• Manufacturer: Hassco industries inc

-Shipping dimensions: length 36" x width 26" x height 60" -Double wall, ULC rated -227 L -2.5mm thick primary tank

60 Litres Tank with Pneumatic Lightnin Mixer

• Manufacturer: Lightnin

-Shipping dimensions: length 35" x width 35" x height 49" -316 Stainless -M.A.W.P: 0.42V/10 PSIG -Temp: 300 F -60 L

Chicago Pneumatic CPX 20 refrigerated air dryer

• Manufacturer: Chicago Pneumatic
• Model: CPX20

-Shipping dimensions: Height 33" x Width 18 1/2" x Length 26" -1 Phase -Voltage 115 (230) -Frequency (Hz) 60 -Working pressure: 16 bar -Max pressure: 16 bar -Refrigerant type: R513A -Max inlet temp: 55 C -Max amb...

940 Litres stationary tank

-Open top with lid -Stationary with fork lift accessible flat bottom -Diameter is 32.5" -Height is 47.5" -207 IMP

Lightnin Mixer

• Manufacturer: Lightnin

Model:N33G-33, HP:1/3, Volt:115, Phase:1, RPM:1725,

Ingersoll Rand EP125 Industrial Compressor

• Manufacturer: Ingersoll Rand
• Model: EP125

Good condition Ingersoll Rand EP125 Industrial Compressors available between 1998 and 1999 years. Located in USA and other countries. Click request price for more information.