New in Kuyavian-Pomeranian, Poland

Galvanized support 10 KN ��� new

New 10 kN galvanized support. Each support consists of an outer tube, an inner tube, a head plate, and a floor slab. The system is used for length adjustment, equipped with a ratchet and a ring socket with a hand...

Plettac SL70 type scaffolding frame

• Manufacturer: Plettac
• Model: SL70

Category: Scaffolding

Standard rasto lock, midibox

Standard formwork lock for Rasto Hunnebeck/Midibox formwork. The Rasto lock completely seals the joints between Rasto panels in a single operation, aligning them flush.

Galvanized formwork tripod

A three-beam stand. It facilitates the positioning of supports during the installation of ceiling formwork. It is intended solely as an assembly aid and does not replace the necessary formwork stiffeners. Can be ...

Formwork plug, plastic

Plastic formwork plug with a diameter of 22 mm. The package contains 500 plugs. The plug is used to seal the opening after stripping the formwork. It creates an aesthetically pleasing effect on a reinforced concr...

Rasto corner lock, midibox

Rasto V Corner Lock. Using the Rasto V corner lock and two standard boards, an external corner is created. It can also be used for column formwork. It allows for length compensation of 4 to 6 cm in the external c...

Rasto combi adjustable lock, midibox

R-Kombi adjustable lock. Used to adjust lengths up to 15 cm. It also securely and flush-fits the panels to prevent them from separating.

Clamp connector, Tekko clip

Clamp connector, Tekko clip. They are used to connect boards, corner angles, and adjusting corners. Used in teko formwork and compatible systems.

Formwork distance

Formwork spacer. The package contains 500 spacers. This is a reinforcing spacer, primarily used for vertical reinforcement in wall formwork.

Formwork plug, concrete

Concrete formwork plug with a diameter of 22 mm. The package contains 1000 plugs. This plug is used to seal the opening after stripping the formwork. It creates an aesthetically pleasing reinforced concrete wal...

New formwork plywood, unframed, ��� 200��50 cm

Unframed formwork plywood measuring 200 x 50 cm. Sheet weight: 10 kg. Three-layer wooden formwork panels are high-quality, three-layer wooden panels made of softwood (spruce, pine, fir). The panel structure is m...

Occupational health and safety post, barrier

The railing post is a fundamental element of the lateral protection system. Therefore, it meets the extremely high safety requirements for protective balustrades.

Screwed safety post, barrier

The railing post is a fundamental element of the lateral protection system. The product meets the strength requirements for Class A according to the PN-EN 13374 standard, thus meeting the extremely high safety re...

Tensioning clamp

Using a clamp eliminates the need for a tie rod and spacer tube, thus ensuring tightness after stripping the structure. Reinforcing wire waste is often left on the construction site, but now, thanks to the clamp,...

Formwork head

Formwork head. 8/20 head. Prevents H20 girders from slipping when installed as longitudinal girders. Can support one or two girders. Secured in the support with a T-pin.