Used operator panel

Trusted Seller
Extru-Tech Model E-325 Single Screw Extruder.
- Manufacturer: EXTRU-TECH
Used Extru-Tech Model E-325, Single Screw Extruder. Unit designed primarily for research and development purposes. 3.25", Approximately 40 HP motor, Can process between 150 to 800 pounds per hour (68 to 363 kilog...
Decatur, IL
GNEUSS SFX75 3″ CONTINUOUS SCREEN 17999
Gneuss model SFX75 3″ continuous screen changer. S/N. 02083047. 460/3/60 operation. Includes PLC control panel
Elk Grove Village, IL
Trusted Seller
SUPERSAC UNLOADING STATION
- Manufacturer: SUPERSAC
Used dual Super Sack unloading station including position for (2) super sacks. Has hoist for each station, hopper unload, and operator control panel. Includes (1) volmetric feeders for discharging of each sack.
Hainesport, NJ
Trusted Seller
LEISTRITZ 30mm
- Manufacturer: Leistritz
Used 30mm Leistritz counter-rotating twin screw extruder, 42/1 L/D vented barrel. New 1987. Has 11kw motor, 2200 rpm, 422 volt input. Gearbox rated at 13.5kw at 60hz. Barrel is electrically heated and air cooled ...
Hainesport, NJ
BELLAFORM BH25-25D 25mm EXTRUDER 14768
Bellaform co-extrusion package consisting of the following:Bellaform model BH25-25D 25mm extruder. S/N P19-330877, 10.5 kW AC motor with tachometer and drive, 220-Volt operation. 25:1 L/D air cooled barrel with 3...
Elk Grove Village, IL
Extru-Tech E-325 Single Screw Extruder – 150-800 Lbs/Hr
- Manufacturer: ExtrutechExtrutech
53877002 Used Extru-Tech Model E-325, Single Screw Extruder. Unit designed primarily for research and development purposes. 3.25", Approximately 40 HP motor, Can process between 150 to 800 pounds per hour (68 to ...
Belvidere, IL
4.5″ CRAMMER FEEDER 18765
One (1) Used Egan heavy duty crammer feeder having a nominal 4.5″ diameter screw. Screw is belt driven by a 30 hp dc motor through a Nuttal oversize gear reducer. Motor and gearbox have been updated. Includes ada...
Elk Grove Village, IL
Prism TSE 16TC Benchtop Twin Screw Extruder 65113
- Manufacturer: Bidservice
The PRISM TSE 16 TC extruders are designed for bench-top operation. The horizontally split barrels are quick to open, giving easy access to screws and process contact surfaces for cleaning or configuration change...
$12,500 USD
Get financing
Est. $246/mo
Freehold Township, NJ
WELEX 18″ X 41″ 3 18674
- Manufacturer: Welex
Welex model 18X41RHSL 18″ x 41″ 3-roll sheet extrusion stack. S/N 4750. Rolls are silent chain driven by a 5 HP D/C motor and have air actuated nipping pressure with 8.5″ OD cylinders. Has 42″ wide rubber to meta...
Elk Grove Village, IL
Buss Model MKS 30 Laboratory Ko-Kneader Extruder
- Manufacturer: Buss
51849001 Used Buss Model MKS 30 Laboratory Ko-Kneader Extruder, Serial# 97-1030 (1997). 30mm Diameter x approximate 17" long single screw. Throughput rates up to 30kg per hour. 3 Zone barrel electrically heated, ...
Belvidere, IL
Trusted Seller
2002 COPERION 2.3"
- Manufacturer: Coperion Waeschle
Used 58mm Coperion Co rotating Mega Compounder with 11 barrel sections (34/1 L/D) and side feeder, New 3/2002. Has electrically heated water cooled barrel. Direct connected to 500 hp DC motor with SCR controller....
Hainesport, NJ
Trusted Seller
1998 Milacron Apex 6.0 Extruder
- Manufacturer: Milacron
65" X 24" Cinn/HPM w/6" Ext. 65" X 24" No wind or shear 1998 Used 65" wide Cincinnati Milacron/ HPM 1998 sheet extrusion line last used on PET at Approx 1500-1800 Lbs/Hr. Includes the following:6" HPM extruder 30...
Valley Cottage, NY
Trusted Seller
1998 Milacron Apex 6.0 Extruder
- Manufacturer: Milacron
65" X 24" Cinn/HPM w/6" Ext. 65" X 24" No wind or shear 1998 Used 65" wide Cincinnati Milacron/ HPM 1998 sheet extrusion line last used on PET at Approx 1500-1800 Lbs/Hr. Includes the following: 6" HPM extruder 3...
Valley Cottage, NY
Trusted Seller
BUSS 200 HP
- Manufacturer: Buss
Used 100mm Buss kneader with 9/1 L/D barrel. Driven by 200 hp DC motor, includes 5.94/1 gearbox, jacketed barrel and clam shell barrel opening. Includes operator control panel. Kneader will discharge into approxi...
Hainesport, NJ
DAVIS STANDARD 15INDS20 1.5″ EXTRUDER 12754
- Manufacturer: Davis-Standard
Davis standard model 15INDS20 1.5″ extruder S/N K-9754. SO# 02359. 24:1 L/D. Powered by a fan cooled 15 HP 500-Volt 1750/2300 RPM DC motor through a 6.53:1 gearbox 152 RPM screw speed. Electrically heated and fan...
Elk Grove Village, IL