Used Processing in Zug, Switzerland

Dual Melter

• Manufacturer: Balti AG

Dual systems are used for the processing of two identical or different adhesives with sometimes different containers. E.g. two different reactive hotmelt or one of them non-reactive etc. The big advantage, in con...

Bag Melter

• Manufacturer: Balti AG

The balti bag melters were developed especially for reactive adhesives. Thanks to absolute tightness from the melting plate to the outlet at the application head, the sensitive adhesive is protected from external...

Coating Systems

Coating with hotmelt in a continuous process of continuous material from a roll is called balti, restricting and not quite correct, a coating plant. More information about coating with roller or spray process wit...

Laminating Systems

• Manufacturer: Balti AG

A laminating line is basically an extended coating line. In most cases, a second unwinding roll is used to laminate a further material directly after the adhesive application. By means of a laminating roller with...

Slot Nozzle

• Manufacturer: Balti AG

Adhesive is applied to a substrate with a slotted nozzle. The big advantage of a slot nozzle is its closed, hermetically sealed system, which is especially advantageous for reactive Holtmelt. Mostly on webs in a ...

Roller Coater

Beschichten mit der Walzenauftragstechnik ist weit verbreitet. balti hat sich in den letzten Jahren einen ausgezeichneten Namen erarbeitet mit einem umfassenden und qualitativ auf höchstem Niveau operierenden Hot...

Tank Melter

The balti tank melters are built to the highest quality level and come in many variants for practically every application thanks to their modular design. For melting and conveying of meltable, non-reactive, self-...

Foaming

• Manufacturer: Balti AG

Up to 100-800% (adhesive dependent) Inert gas (mostly N2) in the form of small, compressed air bubbles is homogeneously mixed into the pressurized hotmelt in a controlled dosing and mixing unit (dynamic). Those e...

Static Mixer

• Manufacturer: Balti AG

With the use of "high-end" steel mixing elements, hotmelt can be mixed in-line as efficiently as possible. Depending on the material properties and requirements, the mixing elements are installed directly on the ...

Dynamic Mixer

• Manufacturer: Balti AG

For very demanding applications (e.g. extreme differences in viscosity), a dynamic mixing head is used for temperatures up to 200°C.

Coloration

• Manufacturer: Balti AG

Special color is added in quantities of 0.5 to 3%, usually with a static mixer (color mixer - FM). Ideally, the color is added as close as possible to the nozzle to reduce waste during color change.